- For new designs that do not require interoperability with 9XStream radios, see XBee-PRO 900HP
- Over-the-air compatibility with legacy 9XStream products
- 20 times less current draw than previous XSC module
- Superior outdoor LOS range of up to 28 miles
|Processor||ADF7023 transceiver, Cortex-M3 EFM32G230 @ 28 MHz|
|Frequency Band||902 MHz to 928 MHz|
|Antenna Options||Wire, U.FL, RPSMA|
|RF Data Rate||10 Kbps or 20 Kbps|
|Indoor/Urban Range||Up to 2000 ft (610 m)|
|Outdoor/Line-Of-Sight Range||Up to 9 mi (14 km) w/ dipole antenna
Up to 28 mi (45 km) w/ high-gain antenna
|Transmit Power||Up to 24 dBm (250 mW) software selectable|
|Receiver Sensitivity||-109 dBm at 9600 baud -107 dBm at 19200 baud|
|Operating Temperature||-40° C to +85° C|
|Supply Voltage||2.4 to 3.6 VDC|
|Transmit Current||215 mA|
|Receive Current||26 mA|
|Sleep Current||2.5 uA|
The XBee-PRO XSC 900 MHz RF module features two times the throughput and 20 times less current draw than the previous XSC module, making it ideal for long-range sensor applications. The RF module features an ADF7023 transceiver from Analog Devices, delivering best-in-class distances up to 28 miles Line-of-Sight (LOS), along with low power consumption, drawing less than 2.5 uA in power down.
The latest XBee-PRO XSC (S3B hardware) is firmware compatible with the legacy 9XStream® and the legacy XBee-PRO XSC modules.
Digi’s free X-CTU configuration utility simplifies the configuration of the XSC module, which requires no programming. In addition, it can be easily configured via a simplified AT command set. The RF modules are pre-certified for North America and Australia, further reducing development costs and time to market.