XBeeŽ ZigBee

Embedded ZigBee and Thread-ready RF modules provide OEMs with a simple way to integrate mesh technology into their application

Features

  • Programmable versions with on-board microprocessor enable custom ZigBee application development
  • Through-Hole and Surface Mount form factors enable flexible design options
  • Link budgets of 110 dB for XBee and 119 dB for XBee-PRO
  • Industry-leading sleep current
  • Firmware upgrades via UART, SPI or over the air (OTA)
  • Thread updatable on the S2D EM3587 variant for maximum flexibility

Specification

  Digi XBee S2C ZigBee Digi XBee-PRO S2C ZigBee Digi XBee S2D ZigBee Thread Ready
PERFORMANCE
TRANSCEIVER CHIPSET Silicon Labs EM357 SoC Silicon Labs EM357 SoC Silicon Labs EM3587 Soc
DATA RATE RF 250 Kbps, Serial up to 1 Mbps
INDOOR/URBAN RANGE 200 ft (60 m) 300 ft (90 m) 200 ft (60 m)
OUTDOOR/RF LINE-OF-SIGHT RANGE 4000 ft (1200 m) 2 miles (3200 m) 4000 ft (1200 m)
TRANSMIT POWER 3.1 mW (+5 dBm) / 6.3 mW (+8 dBm)boost mode 63 mW (+18 dBm) 3.1 mW (+5 dBm) / 6.3 mW (+8 dBm)boost mode
RECEIVER SENSITIVITY (1% PER) -100 dBm / -102 dBm boost mode -101 dBm -100 dBm / -102 dBm boost mode
FEATURES
SERIAL DATA INTERFACE UART, SPI
CONFIGURATION METHOD API or AT commands, local or over-the-air (OTA)
FREQUENCY BAND ISM 2.4 GHz
FORM FACTOR Through-Hole, Surface Mount Through-Hole, Surface Mount Surface Mount
INTERFERENCE IMMUNITY DSSS (Direct Sequence Spread Spectrum)
ADC INPUTS (4) 10-bit ADC inputs
DIGITAL I/O 15
ANTENNA OPTIONS Through-Hole: PCB Antenna, U.FL Connector, RPSMA Connector, or Integrated Wire SMT: RF Pad, PCB Antenna, or U.FL Connector
OPERATING TEMPERATURE -40º C to +85º C
DIMENSIONS (L X W X H) AND WEIGHT Through-Hole: 0.960 x 1.087 in (2.438 x 2.761 cm)
SMT: 0.866 x 1.33 x 0.120 in (2.199 x 3.4 x 0.305 cm)
Through-Hole: 0.960 x 1.297 in (2.438 x 3.294 cm)
SMT: 0.866 x 1.33 x 0.120 in (2.199 x 3.4 x 0.305 cm)
SMT: 0.866 x 1.33 x 0.120 in (2.199 x 3.4 x 0.305 cm)
PROGRAMMABILITY
MEMORY Standard: N/A
Programmable: 32 KB Flash/2 KB RAM
Standard: N/A
Programmable: 32 KB Flash/2 KB RAM
N/A
CPU/CLOCK SPEED Standard: N/A
Programmable: HCS08/up to 50.33 MHz
Standard: N/A
Programmable: HCS08/up to 50.33 MHz
N/A
NETWORKING AND SECURITY
PROTOCOL ZigBee PRO 2007, HA-Ready with support for binding/multicasting
ENCRYPTION 128-bit AES
RELIABLE PACKET DELIVERY Retries/Acknowledgements
IDS PAN ID and addresses, cluster IDs and endpoints (optional)
CHANNELS 16 channels 15 channels 16 channels
POWER REQUIREMENTS
SUPPLY VOLTAGE 2.1 to 3.6V 2.7 to 3.6V 2.1 to 3.6V
TRANSMIT CURRENT Standard: 33 mA @ 3.3 VDC/45 mA boost mode
Programmable: 47 mA @ 3.3 VDC/59 mA boost mode
Standard: 120 mA @ 3.3 VDC
Programmable: 120 mA @ 3.3 VDC
33 mA @ 3.3 VDC / 45 mA boost mode
RECEIVE CURRENT Standard: 28 mA @ 3.3 VDC/31 mA boost mode
Programmable: 42 mA @ 3.3 VDC/45 mA boost mode
Standard: 31 mA @ 3.3 VDC
Programmable: 45 mA @ 3.3 VDC
28 mA @ 3.3 VDC / 31 mA boost mode
POWER-DOWN CURRENT Standard: <1 μA @ 25º C
Programmable: 1.5 μA @ 25º C
Standard: <1 μA @ 25º C
Programmable: 1.5 μA @ 25º C
<3 μA at 25º C
REGULATORY APPROVALS
FCC, IC (NORTH AMERICA) Yes Yes Yes
ETSI (EUROPE) Yes No Yes
RCM (AUSTRALIA AND NEW ZEALAND) Yes Yes No (Coming Soon)

Anewtech-ZigBee-module--XBee-ZigBee
XBee and XBee-PRO ZigBee RF modules provide cost-effective wireless connectivity to electronic devices. They are interoperable with other ZigBee PRO feature set devices, including devices from other vendors*.

XBee and XBee-PRO ZigBee modules are ideal for applications in the energy and controls markets where manufacturing efficiencies are critical. The Serial Peripheral Interface (SPI) provides a high-speed interface and optimizes integration with embedded microcontrollers, lowering development costs and reducing time to market. Features like binding and multicasting also allow for simple integration into a Home Automation device.

Products in the XBee family require no configuration or additional development. Programmable versions of the XBee and XBee-PRO ZigBee module make customizing applications easy. Programming directly on the module eliminates the need for a separate processor. Because the wireless software is isolated, applications can be developed with no risk to RF performance or security.

*Interoperability requires the ZigBee Feature Set or ZigBee PRO Feature Set to be deployed on all devices.

Have Questions? Call +65 6292 0801 or email sales@anewtech.com.sg