ConnectPort® X4/X4 H

Remote M2M device networking gateways designed for commercial grade and rugged outdoor applications

Features

  • WAN connectivity via 3G HSPA+/CDMA networks
  • Flexible interfaces: ZigBee/802.15.4, software selectable RS-232/422/485 serial and USB and 2 AIO/2 DIO
  • Small commercial grade enclosure or NEMA 4X/IP66 case with Class 1, Division 2 certifications
  • Full routing/IP filtering plus IPsec/SSL VPNs with DES, 3DES or AES encryption
  • Easy development environment via DIA and Python scripting as part of Digi ESP IDE
  • Support for Modbus/Modbus TCP
  • Digi Device Cloud support for secure, scalable access to an unlimited number of remote assets

Specification

Model ConnectPort X4 ConnectPort X4 IA ConnectPort X4 H
Wireless Interfaces - WWAN**
HSPA+ (U9)  850/900/1700 (AWS)/1900/2100 MHz; Transfer Rate (max): 5.76 Mbps up, 21 Mbps down
Edge (E1) GPRS/EDGE Class 10; 850/900/1800/1900 MHz; Transfer rate (max): 236 Kbps up/down
CDMA 1xRTT (Bx) 800/1900 MHz; Transfer rate (max): 153 Kbps up/down
Connector 1 or 2 x SMA (Center pin - on device: female; on antenna: male) 1 or 2 x SMA (Center pin - on device: female; on antenna: male) 1 x SMA (Center pin - on device: female; on antenna: male)
SIM Slots 2 or 0 (CDMA varients) 2 or 0 (CDMA varients) 1
SIM Security SIM slot cover plates SIM slot cover plates Internal SIM slot
Wireless Interfaces - RF
Standard ZigBee (2.4 GHz), DigiMesh (2.4 GHz or 900 MHz), XBee-PRO 900HP, 802.15.4 or 868
Connector 1 x RP-SMA (Center pin - on device: male; on antenna: female)
Wireless Interfaces - Other
Satellite N/A
GPS N/A
Wi-Fi N/A
Wired Interfaces - Serial
Ports 1
Standard RS-232 RS-232/422/485 (Software selectable)
DTE/DCE DTE
Signal Support TXD, RXD, RTS, CTS, DTR, DSR and DCD
Flow Control Hardware and software flow control
COM Port Redirector RealPort®
Throughput Up to 230 Kbps
Connector DB-9 Male DB-9 Male Screw-down terminal block
Wired Interfaces - Ethernet
Ports 1
Standard IEEE 802.3
Physical Layer 10/100Base-T
Data Rate 10/100 Mbps (auto-sensing)
Mode Full or Half duplex (auto-sensing)
Interface Auto MDI/MDIX
Connector RJ-45
Wired Interfaces - I/O
Ports N/A N/A 2 analog and 2 digital
Connector N/A N/A Screw-down terminal block
Wired Interfaces - USB
Ports 1
Standard USB 1.1
Signaling Full-speed
Connector Type A
Wired Interfaces - Other
Sensor N/A 1 sensor port for use with Watchport® sensors N/A
Software/Management
Management (Cloud-based) Device Cloud
Management (Local) Web Interface via HTTP/HTTPS, Password access control, IP service port control; CLI via serial port, Telnet, Python scripting; Digi SureLink™ "always-on" connection)
Security SSL tunnels, SSHv2, FIPS 197 (IPsec, HTTPS)
Network Protocols UDP/TCP, DHCP, SNMPv1/v2
VPN IPsec with IKE/ISAKMP; Multiple tunnel support; DES, 3DES and up to 256-bit AES encryption; VPN pass-through, GRE forwarding; Simple Certificate Enrollment Protocol (SCEP) for X.509 certificate
Routing NAT, NAT-T (NAT traversal) VPN tunneling, Port forwarding, VPN/GRE pass-through; Access control lists (IP filtering), IP pass-through, Virtual Router Redundancy Protocol (VRRP) per RFC 3768
Industrial Protocol Support Modbus bridge enables Modbus serial to Modbus/TCP conversion; Integrated Python code allows gateway to act as Modbus client/master or Modbus server/slave; Functions like an Ethernet to serial bridge, but uses XBee to transport serial data; Handles unique timing issues per Modbus protocol rules; Uses Modbus Unit ID to look up IP or mesh MAC address.
Real-Time Clock Yes
Memory 16 MB Flash, 32 MB RAM
Power
Input 6-30 VDC 6-30 VDC 100-240 VAC
Consumption Idle: 1.5 W, Max: 10.4 W Idle: 1.5 W, Max: 10.4 W Approx. 15 W
Protection 4 kV burst (EFT) per-4-4, 2 kV surge per EN61000-4 2 kV burst (EFT) (with included power supply
Connector Locking barrel Compression terminal block Pigtail AC power cord
DC Power Cord* Available upon request N/A N/A
AC Power Supply* 12 VDC power supply for 0º C to 40º C (32º F to 104º F) included; Extended temperature power supply available separately N/A Internal
Battery Backup N/A
Surge Protection 4 kV burst (EFT) per-4-4, 2 kV surge per EN61000-4 2 kV burst (EFT) (with included power supply)
External Power Supply 12 VDC power supply for 0º C to 60º C (32º F to 140º F) with locking barrel connector included; Extended temperature power supply available separately Compression Terminal; no external AC power supply included Internal AC power supply
Physical
Dimensions (L x W x H) 5.25 in x 3.35 in x 1.00 in (13.33 cm x 8.50 cm x 2.54 cm 9.50 in x 6.25 in x 3.75 in (240 mm x 160 mm x 95 mm
Weight 0.44 lb (0.20 kg) 3.10 lb (1.41. kg)
Status LEDs Ethernet status, Power, Cellular link/activity, Signal strength (4 bars), XBee link/activity Ethernet status, Power, Cellular link/activity, Signal strength (5 bars), XBee link/activity
Enclosure Material Industrial (metal) NEMA 4X
Enclosure Rating N/A IP66
Mounting Wall-mount bracket sold separately DIN rail bracket included 4x mounting feet on the unit's flange
Environmental
Operating Temperature*** -30º C to +75º C (-22 F to +167 F)
Storage Temperature -40º C to +85º C
Relative Humidity 5% to 95% (non-condensing) N/A (enclosure is water-tight)
Ethernet Isolation 1500VAC min per IEEE 802.3/ANSI X3.263
Serial Port Protection (ESD) +15 kV Air Gap and +8 kV contact discharge per IEC 1000-4-2
Hazardous (Class 1 Div 2) No Yes No
Conformal Coating N/A
Approvals
GSM/UMTS PTCRB, NAPRD.03, GCF-CC, R&TTE, EN 301 511
CDMA/EV-DO CDG, TIA/EIA-690, TIA/EIA-98-E
Cellular Carriers Certified by most major carriers. See www.digi.com for current listing.
Safety UL 60950, CSA 22.2 No. 60950, EN60950; Class 1 Div 2 (IA model only)
Emissions/Immunity CE, FCC Part 15 (Class A), AS/NZS CISPR 22, EN55024, EN55022, Class A

Anewtech-Digi-ConnectPort-X4-X4-H
ConnectPort X4 customizable 2G/3G cellular M2M routing gateways offer a variety of LAN/WAN interface options for end-to-end networking of remote devices including XBee-enabled devices. The wireless gateways include comprehensive IP protocols and IPSec VPN support for high-end routing and security. The easy Python development environment enables custom applications to run locally while interfacing across cellular networks for WAN connectivity to a centralized server.

ConnectPort X4 gateways feature a compact commercial-grade enclosure or an optional outdoors IP66/NEMA 4X enclosure with Class 1, Division 2 rating for more rugged applications. Interface options include Ethernet, serial and XBee RF for flexible connectivity to virtually any remote device.

ConnectPort X4 gateways benefit from the enhanced management capabilities offered by Digi Device Cloud. This web-based device management system enables remote access and control of your Digi cellular routers and gateways.

Have Questions? Call +65 6292 0801 or email sales@anewtech.com.sg