O-IDS-342

Industrial 4 secure serial port to Ethernet device server with 4xRS-232/422/485 and 2x10/100Base-T(X)

Features

  • Operating Modes: Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP
  • Support 4xRS-232/422/485 in DB9 connector
  • Security: SSL data encryption; secured management by HTTPS and SSH: IP Access: IP White List
  • Event Warning by Syslog, Email, SNMP trap, Relay and Beeper
  • Configurable by Web-based and Windows utility (DS-Tool)
  • Various Windows O.S. supported:Windows NT/2000/ XP/ 2003/VISTA(32/64bit)/ Windows 7(32/64bit)
  • Ethernet switch mode enable Daisy Chain
  • 1KV isolation for PoE PD port (IDS-342+)

Specification

Model O-IDS-342 O-IDS-342+
Physical Ports   

10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX

2
P.O.E.   P.O.E.Present at ETH1
Power Device (IEEE 802.3af):
IEEE 802.3af compliant input interface
Over load & short circuit protection
Isolation Voltage: 1000 VDC min.
Isolation Resistance : 108 ohms min
Serial Ports   
Connector DB9 x 4
Operation Mode RS-232/422/485
Serial Baud Rate 110 bps to 460.8 Kbps
Data Bits 7, 8
Parity odd, even, none, mark, space
Stop Bits 1, 1.5, 2
RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
Flow Control XON/XOFF, RTS/CTS, DTR/DSR
Network Protocol   
Protocol ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP V1/V2c, HTTPS, SMTP
LED Indicators   
Power Indicator 3 x LEDs, PWR 1(2)(PoE) / Ready:
Green On: Power is on
10/100 RJ45 port indicator Green for port Link/Act at 100Mbps.
Serial TX / RX LEDs Red: Serial port is receiving data
Green: Serial port is transmitting data
Power   
Redundant Input Power Dual DC inputs. 12-48VDC on 6-pin terminal block Dual DC inputs. 12-48VDC on 6-pin terminal block
Power Consumption (Typ.) 4.32W
Overload Current Protection Present
Reverse Polarity Protection Present on terminal block
Physical Characteristics   
Enclosure IP-30
Dimensions (W x D x H) 66 (W) x 81 (D) x 95 (H) mm
Weight (g) 375g 3384g
Environmental   
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -40 to 70°C (14 to 140°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory Approvals   
EMI FCC Part 15, CISPR (EN55022) class A
EMS

IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11

Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1

Have Questions? Call +65 6292 0801 or email sales@anewtech.com.sg