AS-SBC-210

3.5” SBC with Intel® Atom™ Baytrail-M/D Processor

Features

  • Intel® Atom™ Baytrail-M/D Processor
  • Integrated Intel® Gen7 Intel® Graphics DX 11, OGL3.2
  • Supports Single Channel DDR3L 1333MHz, 1 x SO-DIMM, up to 8GB system memory
  • 1 x COM (RS-232/422/485), 3 x COM (RS-232)
  • 1 x HDMI, 1 x D-Sub, 1 x Dual Channel 24-bit LVDS
  • 2 x USB 3.0, 6 x USB 2.0, 2 x SATA2
  • 1 x mini-PCIe, 1x mSATA (shared)
  • Gigabit LAN : 2 x Realtek Lan
  • 1 x TPM Header
  • 9~36 V DC-in

Specification

Anewtech-AS-SBC-210
 Form Factor
Dimensions- 3.5" SBC (5.8-in x 4.0-in) / ( 148 x 102 mm)
 Processor System
CPU- Intel® new Atom™ Baytrail-M/D
- Supports Hyper-Threading Technology
Core Number- 4
Max Speed- (By CPU)
L3 Cache- 2MB
Chipset- N/A
BIOS- UEFI
 Expansion Slot
PCI- 0
Mini-PCIe- 1 (Half Size) + 1 (Full Size) shared with mSATA
mSATA- 1 (Full Size) shared with SATA2
PCIe- 0
CFast Card Socket- 0
 Memory
Technology- Single Channel DDR3L 1333 MHz SDRAM
Max.- 8GB
Socket- 1 x SO-DIMM
 Graphics
Controller- Intel® Gen7 Intel® Graphics DX 11, OGL3.2
VRAM- Shared Memory
VGA- Supports max. resolution 1920x1200
LVDS- Dual Channel 24-bit, max resolution 1920x1200@60Hz
HDMI- Supports HDMI 1.4a, max resolution 1920x1200
DVI- No
DisplayPort- No
MultiDisplay- Yes (Dual Display)
 Ethernet
Ethernet- 10/100/1000 Mbps
Controller- GbE LAN: Realtek RTL8111G-CG
Connector- 2 x RJ-45
 SATA
Max Data Transfer Rate- SATA2 (3.0Gb/s)
 Rear I/O
VGA- 1
DVI- 0
HDMI- 1
DisplayPort- 0
Ethernet- 2
USB- 2 (USB 3.0)
Audio- 1 (Line out)
Serial- 0
eSATA- 0
PS2- 0
 Internal Connector
USB- 6 (3 x 2.54 pitch header USB 2.0 compliant)
LVDS / inverter- 1/1
VGA- 0
Serial- 4 (RS-232)
SATA- 2 x SATA2 ( 3.0Gb/s)
mPCIe- 1
Parallel- 0
mSATA- 1 (shared)
IrDA- 0
GPIO 8-bit- 4 x GPI + 4 x GPO
SATA PWR Output Con- 1
Speaker Header- 1
 Watchdog Timer
Output- From Super I/O to drag RESETCON#
Interval- 256 segments, 0,1,2…255sec/min
 Power Requirements
Input PWR- 9-36V DC-In using 4-pin ATX PWR Con
Power OnAT/ATX Supported
- AT : Directly PWR on as Power input ready
- ATX: Press Button to PWR on after Power input ready
 Environment
Temperature- 0ºC – 60ºC

Have Questions? Call +65 6292 0801 or email sales@anewtech.com.sg