Digi XBee3 DigiMesh 2.4

Wireless connectivity using the innovative and easy-to-deploy DigiMesh protocol

Features

  • At 13 mm x 19 mm, the new Digi XBee3 micro form factor allows for more compact and portable applications
  • Digi XBee3 is one module for all protocols including: ZigBee, 802.15.4, DigiMesh, and BLE, all configurable via Digi XCTU
  • Eliminate the need for an external microcontroller and create smart end nodes and low-end gateways using MicroPython
  • Intrinsic IoT security with Digi TrustFence®, a layered approach securing the edge device, through the gateway, into and out of the IoT

Specification

Model Digi XBee3™ DigiMesh Digi XBee3™ DigiMesh PRO
PERFORMANCE
DATA RATE RF 250 Kbps, Serial up to 1 Mbps
INDOOR/URBAN RANGE 200 ft (60 m) 300 ft (90 m)
OUTDOOR/RF LINE-OF-SIGHT RANGE 4000 ft (1200 m) 2 miles (3200 m)
TRANSMIT POWER +8 dBm +19 dBm
RECEIVER SENSITIVITY (1% PER) -103 dBm Normal Mode
FEATURES
SERIAL DATA INTERFACE UART, SPI, I2C
CONFIGURATION METHOD API or AT commands, local or over-the-air (OTA)
FREQUENCY BAND ISM 2.4 GHz
FORM FACTOR Micro
INTERFERENCE IMMUNITY DSSS (Direct Sequence Spread Spectrum)
ADC INPUTS (4) 10-bit ADC inputs
DIGITAL I/O/td> 15
ANTENNA OPTIONS Micro: U.FL Antenna, RF Pad, Chip Antenna
OPERATING TEMPERATURE -40º C to +85º C
DIMENSIONS (L X W X H) Micro: 0.533 x 0.76 x 0.087 in (13 x 19 x 2 mm)
PROGRAMMABILITY
MEMORY 1 MB / 128 KB RAM
CPU/CLOCK SPEED HCS08 / up to 50.33 MHz
NETWORKING AND SECURITY
PROTOCOL 802.15.4
ENCRYPTION 128/256 bit AES
RELIABLE PACKET DELIVERY Retries/Acknowledgements
IDS PAN ID and addresses, cluster IDs and endpoints (optional)
CHANNELS 16 channels
POWER REQUIREMENTS
SUPPLY VOLTAGE 2.1 to 3.6V
TRANSMIT CURRENT 40 mA @ 8 dBm
RECEIVE CURRENT 15 mA 135 mA @ 19 dBm
POWER-DOWN CURRENT 1.7 micro Amp @ 25 degrees C
REGULATORY APPROVALS
FCC, IC (NORTH AMERICA) Yes Yes
ETSI (EUROPE) Yes Yes

Digi XBee3™ modules accelerate time to market for designers, OEMs and solution providers by quickly enabling wireless connectivity and easy-to-add functionality. Building on industry-leading technology, pre-certified Digi XBee3 modules offer the flexibility to switch between multiple frequencies and wireless protocols as needed.

These modules use the DigiMesh® networking protocol using a globally deployable 2.4 GHz transceiver. This peerto-peer mesh network offers users added network stability through self-healing, dense network operation, extending the operational life of battery dependent networks and provides an upgrade path to IEEE 802.15.4 or ZigBee® mesh protocols, if desired.

Have Questions? Call +65 6292 0801 or email sales@anewtech.com.sg