Robust Din-rail Fanless Embedded System with RISC-based (iMX-287) Processor 4 COM, 2 CAN Bus and DIO


  • Fanless design
  • RISC-based module (iMX-287) processor
  • 128MB DDR2 SDRAM onboard
  • 4 GB eMMC onboard
  • Completed Industrial AP development software (Serial server,Modbus gateway, SNMP, Remote manager)
  • Wide range DC power input (12 - 48V) with terminal block
  • Ready-to-run embedded Linux operating system
  • Wide temperature operation of -40°C ~ +70°C


CPU iMX-287, ARM9 16-bit RISC CPU, 454 MHz
Chipset N/A
System Memory 1 x SDRAM DDR2 128 MB onboard
COM 4 x RS-232/422/485
USB 1 x USB 2.0
Ethernet 2 x isolated 10/100Mbps
CANbus 2 x CAN 2.0 B
Digital I/O 1 x isolated DIO (4-IN/4-OUT)
Display N/A
Wireless 1 x Mini Card1 x SIM socket
Storage 1 x eMMC 4 GB onboard (for boot disk)1 x SDHC Card
Others 1 x Console PortSupports AXView
monitoring software package
Power Supply 2 power paths with terminal blockPower
Input Range 12-48VDCPower Input
Rating 12-48VDC, 0.68-0.19A
Watchdog Timer WDT 1: one step is 1 sec, 255 levels
Construction Extruded aluminum and heavy-duty steel, IP40
Operating Temperature -40°C ~ +70°C (-40°F ~ +158°F)
Relative Humidity 5% ~ 95%
Vibration 5G @ 10-150Hz, amplitude 0.35ms
(W x D x H)
55 x 155 x 110 mm (2.16" x 6.10" x 4.33")
Weight (net/gross) 1 kg (2.21 lb)
Certifications Heavy Industrial CEFCC Part 18UL508, UL/Cul60950-1, IEC60068 compliance
EOS Linux
Mounting Din railWall mount
AX-rBOX610 cost-effective din-rail fanless embedded system utilises low power RISC-based module (iMX-287) processor and is designed to withstand temperatures ranging from -40°C to +70°C.

AX-rBOX610 features 4 RS-232/422/485 serial ports, dual LANs, 4 digital input channels,4 digital output channels, 2 CAN bus and 1 eMMC onboard 4 GB & 1 x SDHC socket for storage expansion (easy to access) in a compact, IP40 protected, industrial-strength robust case.

Two power paths input minimize the risk of data loss in the event of a single power failure. Its vertical din-rail form factor makes it easy to install the system in a small cabinet. Due to the RISC-based architecture, AX-rBOX610 is not generating a lot of heat while being operated. The ready-to-run AX-rBOX610 is specially designed for remote control/monitoring management applications like unmanned control room, industrial machine, automatic parking lot, traffic cabinet and more.

Have Questions? Call +65 6292 0801 or email