Digi XBee Smart Plug™ ZigBee
- Intelligent wireless energy management device
- Network extender adds distance to ZigBee networks and increases signal strength
- Creates additional network pathways to ensure more reliable mesh network
- Small form factor plugs into standard power outlets, secure mounting tab prevents accidental unplugging
|RF Data Rate||250 Kbps|
|Indoor/Urban Range||Up to 400 ft (120 m)|
|Transmit Power||63 mW (18 dBm), 100 mW EIRP|
|Receiver Sensitivity (1% PER)||-102 dBm|
|Interfaces||ZigBee Pro Feature Set, Digi XBee ZigBee|
|Frequency Band||2.4 GHz (ISM)|
|LEDs||Outlet (Yellow): Solid when user AC socket is powered; Associate (Green): Solid when external power is supplied, blinks when unit is connected and associated to an RF network|
|Controls||Push Button - Device reset, Configuration reset to factory defaults, Identification/Commissioning mode|
|Locking Mechanism||Unit secures to electrical outlet using center outlet screw (U.S. model only)|
|Current Sensor||Detects current draw from user AC socket, Range: 0A to 8A|
|Ambient Light Sensor||Range of spectral bandwidth: 360 to 970 nm (similar to human eye) Wavelength of peak sensitivity: 570 nm|
|Networking & Security|
|Number of Channels||12 - 5 MHz channels (Direct Sequence Spread Spectrum)|
|Dimensions (L x W x H)||3.07 in x 2.42 in x 1.47 in (9.40 cm x 6.14 cm x 3.73 cm)|
|Weight||2.50 oz (70.87 g)|
|Power Input||120VAC, 60 Hz|
|Load Rating||Resistive: 120VAC, 8A; Inductive (0.75 pf): 120VAC, 960VA; Motor: 1/3 HP (7.2 FLA)|
|Operating Temperature||0° C to 40° C (32° F to 104° F)|
|Relative Humidity||5% to 95% (non-condensing)|
|FCC Class B (USA)||Yes|
|IC Class B (Canada)||Yes|
|UL||UL listed 40HP, Category Code: ATNZ/7 - Appliance Controls, File: E321891|
ZigBee technology enables low-cost, low-power networking of sensors, controllers and other such devices in self-configuring, self-healing wireless mesh networks. The Digi XBee Smart plug is an intelligent outlet that has the ability to measure and control electrical devices plugged in via a standard electrical outlet. A key benefit is more efficient usage of energy, resulting in decreased costs.
Part of Digi's Drop-in Networking family, the Digi XBee Smart Plug integrates with ConnectPort® X gateways to centralize input from multiple Digi XBee Smart Plugs into an energy management solution. Load consumption information from attached electrical devices can be communicated for monitoring or control of the attached appliance. Information including on/off status, operating range and erratic behavior can be determined and used to initiate subsequent actions, such as powering off a device.
The Digi XBee Smart Plug includes a built-in mounting tab, which allows it to be securely screwed into standard wall sockets using the existing mounting screw hole. In addition to ZigBee network extension, the Digi XBee Smart Plug also includes integrated environmental sensors. Customers using ConnectPort® X gateways have the ability to receive Digi XBee Smart Plug also provides instantaneous energy consumption information when polled from a ZigBee coordinator such as the ConnectPort X gateway.
Digi XBee Smart Plugs can be used with ConnectPort X gateways, XBee® embedded modules, XBee adapters or XBee sensors to "drop-in" end-to-end device networks – without the need for a wired network infrastructure.