XBee-PRO® 900HP RF Modems
- Industrial design with -40° C to 85° C operating temperature
- Superior outdoor LOS range of up to 28
- Miles with high-gain antenna
- Over-the-air firmware updates via other XBee-PRO 900HP modems/modules or
- Digi Device Cloud
- Software-selectable channel mask for interference immunity
- RF Data throughput up to 200 Kbps
|Indoor/Urban Range||Performance Indoor/Urban Range 10 Kbps: up to 2000 ft (610 m); 200 Kbps: up to 1000 ft (305 m)|
|Outdoor/RF Line-of-Sight Range||10 Kbps: up to 9 miles (15.5 km); 200 Kbps: up to 4 miles (6.5 km); w/2.1 dbi dipole antenna|
|Transmit Power Output||Up to 24 dBm (250 mW) software selectable|
|Throughput Data Rate||10 Kbps: up to 8.8 Kbps; 200 Kbps: up to 105.5 Kbps; (When configured as point-to-multipoint)|
|RF Data Rate||10 Kbps or 200 Kbps|
|Interface Data Rate||125-65,0000 bps (Software selectable, includes non-standard baud rates)|
|Receiver Sensitivity||10 Kbps: -110 dBm; 200 Kbps: -101 dBm|
|Network and Security|
|Frequency||902-928 MHz (located in the 900 MHz ISM Band)|
|Spread Spectrum||Frequency hopping|
|Supported Network Topologies||Mesh, Point-to-point, Point-to-multipoint, Peer-to-peer|
|Channel Capacity||8 hop sequences share 25 channels, 64 channels available
(there are 64 channels available, of which the user can select 25 that are hopped through in 8 different patterns.
|Connector||RPSMA (Reverse polarity SMA)|
|Power Supply||7-30 VDC|
|Receive Current||60 mA(@9V)|
|Transmit Current||140 mA(@9V)|
|Size||4.5 in x 2.75 in x 1.125 in (11.4 cm x 7 cm x 2.9 cm)|
|Weight||5.25 oz (150 g)|
|Data Connection||RS-232 female DB-9, RS-485/422 screw terminal, USB Type B, Config USB mini-B, 10/100 Ethernet|
|Operating Temperature||-40° C to 85° C (Industrial)|
|FCC Part 15.247 (U.S.A||Yes|
XBee-PRO 900HP RF modems can be configured in minutes to provide reliable serial cable replacement between many different types of electronic devices. These modems utilize the XBee-PRO 900HP 900 MHz RF Module in an enclosure with interface options that include RS-232, RS-485, USB and Ethernet with transmission ranges of up to 28 miles.
XBee-PRO 900HP RF modems allow the user to easily make their existing wired systems wireless simply by connecting to this product. They take advantage of the DigiMesh ® networking protocol, featuring dense network operation using mesh technology.
XBee-PRO 900HP RF modems can wirelessly connect a variety of devices across many applications including remote monitoring, building automation/ security, industrial automation/SCADA, fleet management/asset tracking and sensor data capture in embedded systems.