Digi XBee-PRO® 900HP RF Modems

Long Range Industrial Wireless Modems



  • Industrial design with -40° C to 85° C operating temperature
  • Superior outdoor LOS range of up to 28 Miles with high-gain antenna
  • Over-the-air firmware updates via other XBee-PRO 900HP modems/modules or Digi Remote Manager
  • Software-selectable channel mask for interference immunity
  • RF Data throughput up to 200 Kbps


Item XBee-PRO® 900HP RF Modems
Indoor/Urban Range Performance Indoor/Urban Range 10 Kbps: up to 2000 ft (610 m); 200 Kbps: up to 1000 ft (305 m)
Outdoor/RF Line-of-Sight Range 10 Kbps: up to 9 miles (15.5 km); 200 Kbps: up to 4 miles (6.5 km); w/2.1 dbi dipole antenna
Transmit Power Output Up to 24 dBm (250 mW) software selectable
Throughput Data Rate 10 Kbps: up to 8.8 Kbps; 200 Kbps: up to 105.5 Kbps; (When configured as point-to-multipoint)
RF Data Rate 10 Kbps or 200 Kbps
Interface Data Rate 125-65,0000 bps (Software selectable, includes non-standard baud rates)
Receiver Sensitivity 10 Kbps: -110 dBm; 200 Kbps: -101 dBm
Network and Security
Frequency 902-928 MHz (located in the 900 MHz ISM Band)
Spread Spectrum Frequency hopping
Supported Network Topologies Mesh, Point-to-point, Point-to-multipoint, Peer-to-peer
Channel Capacity 8 hop sequences share 25 channels, 64 channels available
(there are 64 channels available, of which the user can select 25 that are hopped through in 8 different patterns.
Connector RPSMA (Reverse polarity SMA)
Power Requirements
Power Supply 7-30 VDC
Receive Current 60 mA(@9V)
Transmit Current 140 mA(@9V)
Physical Properties
Size 4.5 in x 2.75 in x 1.125 in (11.4 cm x 7 cm x 2.9 cm)
Weight 5.25 oz (150 g)
Data Connection RS-232 female DB-9, RS-485/422 screw terminal, USB Type B, Config USB mini-B, 10/100 Ethernet
Operating Temperature -40° C to 85° C (Industrial)

XBee-PRO 900HP RF modems can be configured in minutes to provide reliable serial cable replacement between many different types of electronic devices. These modems utilize the XBee-PRO 900HP 900 MHz RF Module in an enclosure with interface options that include RS-232, RS-485, USB and Ethernet with transmission ranges of up to 28 miles.

XBee-PRO 900HP RF modems allow the user to easily make their existing wired systems wireless simply by connecting to this product. They take advantage of the DigiMesh ® networking protocol, featuring dense network operation using mesh technology.

XBee-PRO 900HP RF modems can wirelessly connect a variety of devices across many applications including remote monitoring, building automation/ security, industrial automation/SCADA, fleet management/asset tracking and sensor data capture in embedded systems.