AD-ADAM-6022

Ethernet-based Dual-loop PID Controller

Anewtech-Ethernet-IO-Module-AD-ADAM-6022

Features

  • 2 loop PID control algorithms built in one package
  • 3 analog input/1 analog output/1 digital input/1digital alarm output for 1 PID loop
  • Support multiple analog I/O ranges: 0 ~ 10 VDC, 0 ~ 20 mA and 4 ~ 20 mA
  • Support heating/cooling (direct/reverse) action mode
  • Support loop open/close (PID disable/enable) and analog output manual control modes
  • Built-in watchdog timer

Datasheet

Specification

Display
LED Indicators Status, Comm, Link, Speed
Power Supply
Power Requirement 10~30 VDC
Analog Input
Channel Independent Configuration Yes
Sampling Rates 10 samples/second
Resolution 16-bit
Channels 6 differential
Voltage Range ±10 V
Current Input 0~20 mA 4~20 mA
Input Impedance 20 MOhm
Span Drift ±25 ppm/°C
Zero Drift ±6 µV/°C
Analog Output
Channels 2
Voltage Range 0~10 V
Current Output 0~20 mA 4~20 mA
General
Watchdog Timer System (1.6 second) & Communication (programmable)
Temperature (Operating) -10~70 °C (14~158 °F)
Humidity 20~95 %RH
Temperature (Storage) -20~80 °C (-4~176 °F)
Interface 10/100Base-T(X)
Peer-to-Peer No
GCL No
Isolation Protection 2000 VDC
Communication Protocol Modbus/TCP, TCP/IP, UDP, and HTTP
Communication Speed Ethernet: 10/100Mbps
Comm. Distance Ethernet: 100 m
Connector 1 x RJ-45 (LAN) & 2 x plug-in terminal block (I/O and power)
Digital Input
Input Voltage Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~3 VDC Logic level 1: 10~30 VDC
Channels 2
Digital Output
Channels 2, open collector to 30V, 100 mA max. load
Power Dissipation 300 mW for each module