O-IGS-P9812GP-HV
IEC 61850-3 Managed Ethernet Switch with 8GE and 12G SFP, Dual AC/DC
- Designed for power substation / Railway application and fully compliant with the requirement of IEC 61850-3 and IEEE 1613
- Leading EN50155-compliant Ethernet switch for rolling stock application
- Support O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) for Ethernet Redundancy
- Open-Ring support the other vendor's ring technology in open architecture
- O-Chain allow multiple redundant network rings
- Support IEC 62439-2 MRP (Media Redundancy Protocol) function
- Support IEEE 1588v2 clock Synchronization
- Built-in MMS server and IEC 61850 QoS
- Support Modbus TCP and Ethernet/IP
Datasheet
Product Specification
| Physical Port | |
| 10 100 1000BASE-T X PORTS IN RJ45 | 8 |
| 100 1000BASE-X WITH SFP PORT | 12 |
| Quick Filter | |
| Number of ports | 20 |
| Product Type | Layer 2 |
| Max Speed | 1G |
| Connections | Fiber, PTP(1588) |
| Installation | DIN Rail |
| Certifications | IEC 61850-3 |
| Power | |
| POWER CONSUMPTION TYP | 24 Watts |
| REDUNDANT INPUT POWER | Dual power inputs. 85~264VAC / 88~373VDC on 6-pin terminal block |
| OVERLOAD CURRENT PROTECTION | Present |
| REVERSE POLARITY PROTECTION | Present |
| PROTECTION CERTIFICATION | |
| SAFETY | EN60950-1 |
| Physical Characteristic | |
| ENCLOSURE | IP-30 |
| Dimensions (mm) | 115 (W) x 159 (D) x 154 (H)mm (4.53 x 6.26 x 6.06 inch) Weight (g) 1520 g |
| WEIGHT G | 1870 g |
| LED indicator | |
| POWER INDICATOR POWER | Green : Power LED x 3 |
| RING MASTER INDICATOR R M | Green : Indicates that the system is operating in O-Ring Master mode |
| O-RING INDICATOR RING | Green : Indicates that the system operating in O-Ring mode Green Blinking : Indicates that the Ring is broken |
| FAULT INDICATOR FAULT | Amber : Indicate unexpected event occurred |
| 10 100 1000BASE-T X RJ45 PORT INDICATOR | Green for Link/Act. Dual color LED for speed indicator: Green for 1000Mbps, Amber for 100Mbps, Off-light for 10Mbps |
| 100 1000BASE-X SFP PORT INDICATOR | Green for port Link/Act |
| Technology | |
| ETHERNET STANDARDS | IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX and 100Base-FX IEEE 802.3ab for 1000Base-T IEEE 802.z for 1000Base-X IEEE 802.3x for Flow control IEEE 802.3ad for LACP (Link Aggregation Control Protocol ) IEEE 802.1p for COS (Class of Service) IEEE 802.1Q for VLAN Tagging IEEE 802.1Q-2014 MSTP (compatible with STP/RSTP) IEEE 802.1x for Authentication IEEE 802.1AB for LLDP (Link Layer Discovery Protocol) |
| MAC TABLE | 8k |
| PACKET BUFFER SIZE | 4Mbits |
| PRIORITY QUEUES | 8 |
| PROCESSING | Store-and-Forward |
| SWITCH PROPERTIES | Switching latency: 7 us Switching bandwidth: 40Gbps Max. Number of Available VLANs: 4095 VLAN ID Range: VID 1 to 4094 IGMP multicast groups: 256 for each VLAN Port rate limiting: User Define Https / SSH enhance network security |
| JUMBO FRAME | 9.6K |
| SECURITY FEATURES | Device Binding security feature Enable/disable ports, MAC based port security Port based network access control (802.1x) VLAN (802.1Q ) to segregate and secure network traffic Radius centralized password management SNMPv3 encrypted authentication and access security Https / SSH enhance network security |
| SOFTWARE FEATURES | MSTP (RSTP/STP compatible) Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units TOS/Diffserv supported Quality of Service (802.1p) for real-time traffic VLAN (802.1Q) with VLAN tagging IGMP Snooping IP-based bandwidth management Application-based QoS management DOS/DDOS auto prevention Port configuration, status, statistics, monitoring, security DHCP Server/Client/Relay SMTP Client Modbus TCP NTP server |
| Fault contact | |
| RELAY | Relay output to carry capacity of 1A at 24VDC |
| Environmental | |
| STORAGE TEMPERATURE | -40 to 85oC (-40 to 185oF) |
| OPERATING TEMPERATURE | -40 to 75oC (-40 to 167oF ) |
| OPERATING HUMIDITY | 5% to 95% Non-condensing |
O-IGS-P9812GP is IEC 61850-3 managed redundant ring Ethernet switch with 8x10/100/1000Base-T(X) ports and 12x100/1000Base-X SFP ports. The switch is designed for power substation application and rolling stock application, fully compliant with the requirement of IEC 61850-3 and IEEE 1613 and fully compliant with EN50155 requirement.
With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible), the switch can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. O-IGS-P9812GP can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration.