ID-DDR5 ECC UDIMM

Interface: DDR5, Form Factor: ECC UDIMM , Function: ECC Unbuffered Memory

Anewtech Systems Flash Storage Innodisk Embedded DDR5 DRAM Module ID-DDR5-ECC-UDIMM
  • High Capacity and Speed (Maximum Potential Up to 128GB & 6400MT/s)
  • Single Error Correction and Detection Available
  • Fully Tested and Optimized for Stability and Performance
  • Uses Original IC to Meet Strict Industrial Standards
  • On module Power Management IC (JEDEC Standard: 1.1V)
  • 30μ” Gold Finger
  • Operating Environment: 0°C ~ 85°C
Product Specification
ModelDDR5 ECC SODIMM
InterfaceDDR5
Form FactorECC UDIMM
Data Rate4800 MT/s
Capacity16GB, 32GB
FunctionECC Unbuffered Memory
Pin Number288pin
Width72Bits
Voltage1.1V
PCB Height1.23 Inches
Operating Temperature0°C to 85°C
30μ” Gold FingerY
Anti-SulfurationY

The JESD79-5 DDR5 SDRAM specification has significant improvements in capacity, speed and voltage. By structure wise, the Power Management IC (PMIC) is moved onto the DIMM, reducing redundant power management circuitry on the motherboard for unused DIMM slots in previous generations. The DDR5 specification is bringing the maximum potential capacity for a single DDR5 DIMM to 128GB, a theoretical maximum transfer speed of 6400MT/s which is doubling the rate of DDR4, along with the improved power consumption as 1.1V.

The modules come equipped with 30μ”Gold Fingers, and another significant structural change is dual-channel DIMM architecture. For DDR5, each DIMM has two 40-bit channels (32 data bits plus 8 ECC data bits). Two independent subchannels improve memory access efficiency, leading to greater speeds with higher efficiency.

The modules comply with all relevant JEDEC standards and are available in 16GB and 32GB capacities, as 4800MT/s.