ID-EMUC-B202
Module Type: USB to dual isolated CANbus 2.0B/J1939 Module, Form Factor: mPCIe
- CANbus 2.0B backward compatible with 2.0A
- Support baud rate 100/125/250/500(default)/800/1000K
- Support CAN message acceptance filter
- Keep configuration after hardware reboot
- Up to 6000 CAN messages per second (receive data)
- Support Listen-only mode
- Additional driver to support Linux SocketCAN
- Support SAE J1939 high layer protocol (Optional)
- Termination resistor enabled/disabled by jumper
- Complies with EN61000-4-5 2.5kV Surge protection
- Complies with IEC 60950-1:2005 + A1: 2009 + A2:2013 2.5kV HiPOT protection
- Complies with EN61000-4-2 (ESD) Air-15kV, Contact-8kV
- Supports 3rd mounting hole and USB Pin header for outof-minicard installation
- 30μ" golden finger
- Supports -40 to +85 degrees
Product Specification
| Module Type | USB to dual isolated CANbus 2.0B/J1939 Module |
| Function | CANbus |
| Form Factor | mPCIe |
| Input I/F | USB 2.0 |
| Output I/F | CANbus 2.0B |
| Output connector | 2 x DB-9 |
| TDP | 1.62W (3.3V, 490mA) |
| Dimensions (W x L x H/mm) | 30 x 50.9 x 8.35 |
| Temperature | Operation: W/T temp: -40°C ~ +85°C Storage: -55°C ~ +95°C |
| Environment | Vibration: 5G @7~2000Hz Shock: 50G @ 0.5ms |