ID-M.2 (S42) 3MG2-P
Interface: SATA III 6.0 Gb/s. Flash Type: MLC. Capacity: 32GB~256GB
- SATA 6Gb/s interface
- iSMART disk health monitoring
- Intelligent error recovery system
- Zero mechanical interference
- Anti-vibration mechanical design
Datasheet
Product Specification
| Model Name | M.2 (S42) 3MG2-P |
| Interface | SATA III 6.0 Gb/s |
| Flash Type | MLC |
| Capacity | 32GB~256GB |
| Max. Channels | 4 |
| Sequential R/W (MB/sec, max.) | 530/340 |
| Max. Power Consumption | 2.6 W (3.3V x 788 mA ) |
| Thermal Sensor | Y |
| H/W Write Protect | Y |
| ATA Security | Y |
| S.M.A.R.T. | Y |
| Dimension (WxLxH/mm) | 22.0 X 42.0 X 4.5 |
| Vibration | 20G@7~2000Hz |
| Shock | 1500G@0.5ms |
| MTBF | >3 million hours |
| Storage Temperature | -55°C ~ +95°C |
| Operation Temperature | Standard Grade: 0°C ~ +70°C; Industrial Grade: -40°C ~ +85°C |
M.2 (S42) 3MG2-P is designed as the standard M.2 form factor with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. The form factor refers to the M.2 (NGFF) specification which established by JEDEC. Regarding of mechanical interference, M.2 (S42) 3MG2-P absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.
M.2 (S42) 3MG2-P effectively reduces the booting time of operation system, and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drivers are required, and can be configured as a boot device or data storage device.
Ordering Information
| Operating Temperature | Standard Grade (0°C ~ 70°C) | Industrial Grade (-40°C ~ 85°C) |
| 32GB | DGM24-32GD81BCADC | DGM24-32GD81BWADC |
| 64GB | DGM24-64GD81BCAQC | DGM24-64GD81BWAQC |
| 128GB | DGM24-A28D81BCAQC | DGM24-A28D81BWAQC |
| 256GB | DGM24-B56D81BCAQC | DGM24-B56D81BWAQC |
For TCG OPAL function, the PN Code 10th ~ 12th will be D82.