AS-IMB-X1222-WV
Mini-ITX motherboard supports Intel® Xeon® W-1200 series & Intel® 10th Gen Core™ Processors
- Intel® Xeon® W-1200 series & Intel® 10th Gen (Comet lake-S) Core™ Processors with W480E chipset
- 2 x 260-pin SO-DIMM Support Dual Channel SO DIMM DDR4 2933 (i9 / i7 CPU) / 2666 (i5 / i3 CPU) / 2400 (Pentium / Celeron CPU), up to 64GB
- Support ECC SO DIMM memory modules
- 1 x PCIe x16 Gen3, 6 x USB 3.2 Gen1, 4 x USB 2.0
- 1 x M.2 Key E, 1 x M.2 Key M, 1 x M.2 Key B, 4 x COM, 2 x SATA3
- 1 x Intel 2.5 Gigabit LAN, 1 x Intel 1 Gigabit LAN
- Support Triple display, 2 x DP 1.2, 1 x LVDS or eDP, 1 x HDMI 2.0a
- TPM 2.0 onboard
- 12V~28V DC-in
Datasheet
Product Specification
| Form Factor | |
| Dimensions | Mini-ITX (6.7-in x 6.7-in) |
| Processor System | |
| CPU | Intel® 10th Gen (Cometlake-S) Core™ Processorss, up to 80W *The performance of CPUs over 80W will be limited due to power design. |
| Chipset | Intel® W480E |
| Socket | LGA1200 |
| BIOS | AMI SPI 256 Mbit |
| Memory | |
| Technology | Dual Channel DDR4 2933 / 2666 / 2400 MHz, (ECC memory supported by CPU) Intel Core i9 / i7 CPUs support DDR4 up to 2933 MHz Intel Core i5 / i3 CPUs support DDR4 up to 2666 MHz Intel Pentium / Celeron CPU support DDR4 up to 2400 MHz |
| Capacity | 64GB (32 GB per DIMM) |
| Socket | 2 x 260-pin SO-DIMM |
| Graphics | |
| Controller | Intel® UHD Graphics |
| DisplayPort | DisplayPort 1.2 , DP++ Max resolution up to 4096 x 2160@60Hz |
| eDP | eDP 1.4, Max resolution up to 4096 x 2304@60Hz |
| MultiDisplay | Triple Display |
| HDMI | HDMI 2.0a, Max resolution up to 4096 x 2160@60Hz |
| LVDS | Dual channel 24 bit up to 1920 x 1200@60Hz |
| Expansion Slot | |
| PCIe | 1 x PCIe x16 (Gen3, Support riser card x8 / x8, x8 / x4 / x4) |
| M.2 | 1 x M.2 (Key E, 2230) with PCIe x1, USB 2.0 and CNVi for Wireless 1 x M.2 (Key B, 3042 / 3052) with PCIe x1 / USB 3.0/USB2.0 and SIM for 4G / 5G |
| SIM Socket | 1 x SIM socket connected to M.2 Key B |
| Audio | |
| Interface | Realtek ALC887 HD, High Definition Audio. Line-out, Mic-in |
| Ethernet | |
| Controller/ Speed | LAN1: Intel® I225LM with 10/100/1000/2500 Mbps LAN2: Intel® I219LM with 10/100/1000 Mbps, support AMT / vPro |
| Connector | 2 x RJ-45 |
| Rear I/O | |
| DisplayPort | 2 x DP 1.2 |
| Ethernet | 1 x 1 Gigabit LAN 1 x 2.5 Gigabit LAN |
| USB | 4 x USB 3.2 (Gen1) |
| Audio | 2 (Mic-in, Line-out) |
| HDMI | 1 x HDMI 2.0a |
| DC Jack | 1 |
| Internal Connector | |
| USB | 2 x USB 3.2 Gen1 (1 x USB 3.2 Gen1 header) 4 x USB 2.0 (2 x 2.54 pitch header) |
| COM | 4, COM1, 2 (support RS-232/422/485), COM3, 4 (support RS-232 only) |
| GPIO | 4 x GPI, 4 x GPO |
| TPM | TPM 2.0 onboard |
| LVDS | 1, switch by BIOS default LVDS |
| eDP | 1, switch by BIOS default LVDS |
| Speaker Header | 1 |
| SATA PWR Output | 1 |
| Thunderbolt header | 1 |
| Storage | |
| M.2 | 1 x M.2 (Key M, 2242 / 2260 / 2280) with PCIE x4 and SATA3 for SSD |
| SATA | 2 x SATA3 (6Gb/s) |
| Watchdog Timer | |
| Output | From Super I/O to drag RESETCON# |
| Interval | 256 Segments, 0, 1, 2, ...255sec |
| Power Requirements | |
| Input PWR | 12V~28V DC-in with 4 pin plug PWR cable or DC Jack |
| Power On | AT/ATX Supported AT : Directly PWR on as power input ready ATX : Press button to PWR on after power input ready |
| Environment | |
| Operating Temp | 0ºC ~ 60ºC |
| Storage Temp | -40° C ~ 85° C |
| Operating Humidity | 5% ~ 90% |
| Storage Humidity | 5% ~ 90% |