O-IGPS-1411GTP-24V
6-port slim unmanaged Gigabit PoE Ethernet switch. 4x10/100/1000Base-T(X) P.S.E., 1x10/100/1000Base-T(X), 1x1000Base-X, SFP
- 4x10/100/1000Base-T(X) PoE (P.S.E.) ports
- Support P.S.E. based on IEEE 802.3at standard up to 30 Watts per port
- Supports Jumbo frame up to 10KBytes
- SFP port support 100Base-FX and 1000Base-X speed
- Support auto-negotiation and auto-MDI/MDI-X
- Support dual wide range 12~57VDC power inputs for power redundancy
- Supports flow control
- Rigid IP-30 housing design
Datasheet
Product Specification
| Physical Ports | |
| 10/100/1000Base-T(X) Ports in RJ45 with P.S.E. Auto MDI/MDIX | 4 |
| 10/100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX | 1 |
| 100/1000Base-X SFP port | 1 |
| Technology | |
| Ethernet Standards | IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX IEEE 802.3ab for 1000Base-T IEEE 802.3z for 1000Base-X IEEE 802.3x for Flow control IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.) |
| MAC Table | 1K MAC addressessses |
| Processing | Store-and-Forward |
| LED Indicators | |
| Power indicator | Green : Power LED x 2 |
| Fault Indicator | Amber : Indicate PWR1 or PWR2 failure |
| 10/100/1000Base-T(X) RJ45 port indicator and PoE indicator (P1 ~ P4) | Green for port Link/Act. Green for PoE power injected |
| 10/100/1000Base-T(X) RJ45 port indicator (P5) | Green for port Link/Act. Amber for 100Mbps indicator |
| 100/1000Base-X SFP port indicator (P6) | Green for port Link/Act. |
| SFP Speed DIP-Switch | |
| DIP-Switch 1/2 | DIP-Switch 1 (ON) and DIP-Switch 2 (ON) : SFP speed setting to 100Mbps DIP-Switch 1 (OFF) and DIP-Switch 2 (OFF) : SFP speed setting to 1000Mbps |
| Relay Output DIP-Switch | |
| DIP-Switch 1 | Power-1 failed warning : (ON) enable, (OFF) disable |
| DIP-Switch 2 | Power-2 failed warning : (ON) enable, (OFF) disable |
| Fault contact | |
| Relay | Relay output to carry capacity of 1A at 24VDC |
| Power | |
| Redundant Input Power | Dual DC inputs. 12~57VDC on 6-pin terminal block. |
| Power consumption (Typ.) | 7 Watts (power device not included) |
| PoE Power Budget | 60 Watts at 12~24VDC, 120 Watts at 24~57VDC |
| Overload current protection | Present |
| Reverse polarity protection | Present |
| Physical Characteristics | |
| Enclosure | IP-30 |
| Dimensions (W x D x H) | 41 (W) x 94.9 (D) x 144.3(H) mm (1.61 x 3.74 x 5.68 inches) |
| Weight (g) | 651 g |
| Environmental | |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Operating Temperature | -40 to 75°C (-40 to 167°F) |
| Operating Humidity | 5% to 95% Non-condensing |
| Regulatory Approvals | |
| EMI | FCC Part 15, CISPR (EN55032) class A, EM55024 |
| EMS | IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Safety | EN60950-1 |