O-IGPS-9084GP-LA-24V

12-port managed Gigabit PoE Ethernet switch. 8x10/100/1000 Base-T(X) P.S.E. ports and 4x100/1000 Base-X, SFP socket

Anewtech-Systems Industrial-Ethernet-Switch O-IGPS-9084GP-LA-24V Oring Industrial Networking
  • Support O-Ring(recovery time < 30ms) andMSTP(RSTP/STP compatible) for Ethernet Redundancy
  • O-Chain allow multiple redundant network rings
  • Supportstandard IEC 62439-2 MRP*NOTE (Media Redundancy Protocol) function
  • 8 port P.S.E. fully compliant with IEEE802.3at standard, provide up to 30 Watts per port
  • IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic
  • Support SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network Management
  • Support ACL, TACACS+ and 802.1x User Authentication for security
  • Syslog/SNMP Trap notification for warning of unexpected event
  • Support DBU-01 backup unit device to quickly backup/restore configuration
  • Support LLDP Protocol
  • Rigid IP-30 housing design
  • DIN-Rail and wall mounting enabled
Product Specification
ModelIGPS-9084GP-LA-24V
Physical Ports 
10/100/1000Base-T(X) with P.S.E. Ports in RJ45 Auto MDI/MDIX8
100/1000Base-X with SFP port4
Technology 
Ethernet StandardsIEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3ab for 1000Base-T
IEEE 802.3z for 1000Base-X
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol )
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1Q-2014 MSTP (compatible with STP/RSTP)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
PoE Power Supply TypeEndspan mode
MAC Table8K
Priority Queues8
ProcessingStore-and-Forward
Share Data Buffer4Mbit
Switch PropertiesSwitching latency: 7 us
Switching bandwidth: 6Gbps
Throughput (packet per second) : 17.856Mpps@64Bytes packet
Max. Number of Available VLANs: 4095
VLAN ID Range : VID 0 to 4094
IGMP multicast groups: 256 for each VLAN
Port rate limiting: User Define
Jumbo frameUp to 9.6K Bytes
Security FeatuesDevice Binding security feature
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
VLAN (802.1Q ) to segregate and secure network traffic
Radius centralized password management
SNMPv3 encrypted authentication and access security
Https / SSH enhance network security
Software FeaturesMSTP (RSTP/STP compatible)
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging
IGMP Snooping
IP-based bandwidth management
Application-based QoS management
DOS/DDOS auto prevention
Port configuration, status, statistics, monitoring, security
DHCP Server/Client/Relay
SMTP Client
Modbus TCP
NTP server
Network RedundancyO-Ring
O-Chain
*note MRP
MSTP (RSTP/STP compatible)
RS-232 Serial Console PortRS-232 in RJ45 connector with console cable. 115200bps, 8, N, 1
LED Indicators 
Power Indicator (PWR)Green : Power LED x 3
Ring Master Indicator (R.M.)Green : Indicates that the system is operating in O-Ring Master mode
O-Ring Indicator (Ring)Green : Indicates that the system operating in O-Ring mode
Green Blinking : Indicates that the Ring is broken.
Fault IndicatorAmber : Indicate unexpected event occurred
10/100/1000Base-T(X) RJ45 port IndicatorUpper for Link/Act indicator, Green for Port LINK/ACT indicator
Lower for speed indicator: Green for 1000Mbps / Amber for 100Mbps / off-light for 10Mbps
100/1000Base-X SFP port IndicatorGreen for port Link/Act..
PoE IndicatorGreen : PoE enabled LED x 4
Fault contact 
RelayRelay output to carry capacity of 1A at 24VDC
Reset Function 
Reset Button< 5 sec: System reboot, > 5 sec: Factory default
Power 
Redundant Input PowerDual 12~57 VDC on 6-pin terminal block
Power Consumption (Typ.)13.2 Watts
PoE budget60W at 12~24VDC, 120W at 24~57VDC
Overload Current ProtectionPresent
Reverse polarity protectionPresent
Physical Characteristics 
EnclosureIP-30 Metal
Dimensions (W x D x H)54.3 (W) x 120 (D) x 145.1 (H) mm (2.13 x 4.72 x 5.71 inches)
Weight (g)924g
Environmental 
Storage Temperature-40 to 85°C (-40 to 185°F)
Operating Temperature-40 to 75°C (-40 to 167°F)
Operating Humidity5% to 95% Non-condensing
Regulatory Approvals 
EMCCE EMC (EN 55035, EN 55032), FCC Part 15B
EMIEN 55032, CISPR32, EN 61000-3-2, EN 61000-3-3, FCC Part 15 B class A
EMSEN 55024 (IEC/EN 61000-4-2 (ESD), IEC/EN 61000-4-3 (RS),IEC/EN 61000-4-4 (EFT), IEC/EN 61000-4-5 (Surge), IEC/EN 61000-4-6 (CS), IEC/EN 61000-4-8(PFMF)
ShockIEC60068-2-27
Free FallIEC 60068-2-31
VibrationIEC60068-2-6
SafetyEN62368-1,UL61010-1
MTBF487,579hrs

IGPS-9084GP-LA-24V is layer2 managed PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. ports and 4x100/1000Base-X SFP ports. The switch support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology.

IGPS-9084GP-LA-24V also support Power over Ethernet, a system to transmit electrical power up to 30 watts, total PoE power budget is 120W max, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-9084GP-LA-24V switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports.  P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection.  

It supporta wide operating temperature from -40 oC to 75 oC.  IGPS-9084GP-LA-24V can also be managed centralized and convenient by Open-Vision, except the Web-based interface, Telnet and console (CLI) configuration.