O-IGPS-9842GTP

14-port managed Gigabit PoE Ethernet switch. 8x10/100/1000 Base-T(X) P.S.E., 4x10/100/1000 Base-T(X), 2x100/1000Base-X, SFP

Anewtech Systems Industrial Ethernet Switch managed Switch O-IGPS-9842GTP
  • Leading EN50155-compliant Ethernet switch for rolling stock application
  • Supports O-Ring (recovery time < 30ms over 250 units of connection) and MSTP(RSTP/STP compatible) for Ethernet Redundancy
  • Open-Ring support the other vendor’s ring technology in open architecture
  • O-Chain allow multiple redundant network rings
  • Support standard IEC 62439-2 MRP (Media Redundancy Protocol) function (This function is available by request only)
  • Supports IEEE 802.3at compliant PoE with maximum 30Watts per port
  • Supports PoE scheduled configuration and PoE auto-ping check function
  • Advanced PoE power boost technology to support dual 24VDC power inputs
  • Support IEEE 1588v2 clock Synchronization
  • Supports IPV6 new internet protocol version
  • Support Modbus TCP protocol
Datasheet
Product Specification
ModelIGPS-9842GTPIGPS-9842GTP-24V
Physical Ports
10/100/1000Base-T(X) with P.S.E. ports in RJ45 Auto MDI/MDIX8 (P.S.E. with IEEE 802.3at)
10/100/1000Base-T(X) in RJ45 Auto MDI/MDIX4
100/1000Base-X with SFP port2
Technology
Ethernet StandardsIEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3ab for 1000Base-T
IEEE 802.z for 1000Base-X
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol )
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
MAC Table8192 MAC addresses
Priority Queues8
ProcessingStore-and-Forward
Switch PropertiesSwitching latency: 7 μs
Switching bandwidth: 28Gbps
Max. Number of Available VLANs : 4095
VLAN ID Range : 1 to 4094
IGMP multicast groups: 256 for each VLAN
Port rate limiting: User Define
Jumbo frameUp to 9.6K Bytes
Security FeatuesDevice Binding security feature
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
VLAN (802.1Q ) to segregate and secure network traffic
Radius centralized password management
SNMPv3 encrypted authentication and access security
Https / SSH enhance network security
Software FeaturesSTP/RSTP/MSTP (IEEE 802.1D/w/s)
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging
IGMP Snooping
IP-based bandwidth management
Application-based QoS management
DOS/DDOS auto prevention
Port configuration, status, statistics, monitoring, security
DHCP Server/Client/Relay
SMTP Client
Modbus TCP
Network RedundancyO-Ring
Open-Ring
O-Chain
*note MRP
MSTP (RSTP/STP compatible)
RS-232 Serial Console PortRS-232 in RJ45 connector with console cable. 115200bps, 8, N, 1 (support backup unit)
LED Indicators
Power Indicator (PWR)Green : Power LED x 3
PoE IndicatorGreen : PoE LED x 8
Ring Master Indicator (R.M.)Green : Indicates that the system is operating in O-Ring Master mode
O-Ring Indicator (Ring)Green : Indicates that the system operating in O-Ring mode
Green Blinking : Indicates that the Ring is broken.
Fault Indicator (Fault)Amber : Indicate unexpected event occurred
10/100/1000Base-T(X) P.S.E. RJ45 Port Indicator (P1 ~ P8)Dual color LED : Green for 1000Mbps Link/Act indicator. Amber for 10/100Mbps Link/Act indicator
10/100/1000Base-T(X) RJ45 Port Indicator (P9 ~ P12)Green LED for Link/Act indicator.
Dual color LED for speed indicator ~ Green (1000Mbps) / Amber (100Mbps) / Off-light (10Mbps)
100/1000Base-X SFP Port IndicatorGreen for port Link/Act.
Fault Contact
RelayRelay output to carry capacity of 1A at 24VDC
Power
Redundant Input PowerDual DC inputs. 50 ~ 57VDC on 6-pin terminal blockDual DC inputs. 12 ~ 57VDC on 6-pin terminal block
PoE Power Output50 ~ 57VDC : total power budget is 240Watts with
maximum 30Watts per port
12 ~ 24VDC : total power budget is 60Watts with maximum
30Watts per port.
24 ~ 57VDC : total power budget is 120Watts with
maximum 30Watts per port
Power Consumption (Typ.)13.2 Watts (PoE loading not included)
Overload Current ProtectionPresent
Reverse Polarity ProtectionNOT Present
Physical Characteristics
EnclosureIP-30
Dimensions (W x D x H)74.3 (W) x 109.2 (D) x 153.6 (H)mm (2.93 x 4.3 x 6.05 inch)
Weight (g)1270 g
Environmental
Storage Temperature-40 to 85°C (-40 to 185°F)
Operating Temperature-40 to 75°C (-40 to 167°F)
Operating Humidity5% to 95% Non-condensing
Regulatory Approvals
EMIFCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4)
EMSIEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11
ShockIEC60068-2-27
Free FallIEC60068-2-32
VibrationIEC60068-2-6
SafetyEN60950-1
MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25°C )311,532