Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch

Anewtech Systems Industrial Ethernet Switch Oring Industrial IEC 61850-3 O-IGS-P9164GF
  • Designed for power substation / Railway application and fully compliant with the requirement of IEC 61850-3 and IEEE 1613
  • Support O-Ring (recovery time < 30ms over 250 units of connection) and MSTP(RSTP/STP compatible) for Ethernet Redundancy
  • Open-Ring support the other vendor's ring technology in open architecture
  • O-Chain allow multiple redundant network rings
  • Support standard IEC 62439-2 MRP (Media Redundancy Protocol) function (This function is available by request only)
  • Support IEEE 1588v2 clock Synchronization
  • Support IPV6 new internet protocol version
  • Support Modbus TCP protocol
Product Specification
Physical Ports
10/100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX


Gigabit Combo Port with 10/100/1000Base-T(X) and 100/1000Base-X SFP Port-4
Fiber Ports Number


Fiber Ports Standard1000Base-SX100Base-FX1000Base-LX100Base-FX-
Fiber ModeMulti-modeMulti-modeSingle-modeSingle-mode-
Fiber Diameter (μm)62.5/125 µm @ 50/125 µm62.5/125 µm @ 50/125 µm9/125 µm9/125 µm-
Fiber Optical ConnectorSCSCSCSC-
Typical Distance (km)0.55 km2 Km10 Km30 Km-
Wavelength (nm)850 nm1310 nm1310 nm1310 nm-
Max. Output Optical Power (dBm)-4 dBm-14 dbm-3 dbm-8 dbm-
Min. Output Optical Power (dBm)-9.5 dBm-23.5 dbm-9.5 dbm-15 dbm-
Max. Input Optical Power(Saturation)0 dBm0 dbm-3 dbm0 dbm-
Min. Input Optical Power (Sensitivity)-18 dBm-31 dbm-20 dbm-34 dbm-
Link Budget (dB)8.5 dB7.5 db10.5 db19 db-
  Ethernet StandardsIEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3ab for 1000Base-T
IEEE 802.z for 1000Base-X
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol )
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
MAC Table8k
Packet Buffer4Mbits
Priority Queues8
Switch PropertiesSwitching latency: 7 us
Switching bandwidth: 40Gbps
Max. Number of Available VLANs: 4095
VLAN ID Range : VID 1 to 4094
IGMP multicast groups: 256 for each VLAN
Port rate limiting: User Define
Jumbo FrameUp to 9.6K Bytes
Security FeatureDevice Binding security feature
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
VLAN (802.1Q ) to segregate and secure network traffic
Radius centralized password management
SNMPv3 encrypted authentication and access security
Https / SSH enhance network security
Software FeaturesSTP/RSTP/MSTP (IEEE 802.1D/w/s)
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging and GVRP supported
IGMP Snooping
IP-based bandwidth management
Application-based QoS management
DOS/DDOS auto prevention
Port configuration, status, statistics, monitoring, security
DHCP Server/Client/Relay
SMTP Client
Modbus TCP
NTP server
Network RedundancyO-Ring
MRP (This function is available by request only)
Fast Recovery
MSTP (RSTP/STP compatible)
RS-232 Serial Console PortRS-232 in RJ45 connector with console cable. 115200bps, 8, N, 1
LED Indicators
Power IndicatorGreen : Power LED x 3
Ring Master Indicator (R.M.)Green : Indicates that the system is operating in O-Ring Master mode
O-Ring Indicator (Ring)Green : Indicates that the system operating in O-Ring mode
Green Blinking : Indicates that the Ring is broken.
Fault Indicator (Fault)Amber : Indicate unexpected event occurred
10/100/1000Base-T(X) RJ45 Port IndicatorGreen for Link/Act indicator.
Dual color LED for speed indicator : Green for 1000Mbps indicator / Amber for 100Mbps indicator / Off light for 10Mbps indicator
1000Base-X Fiber Port IndicatorGreen for port Link/Act. (for IGS-P9164GF series)
100Base-FX Fiber Port IndicatorGreen for port Link/Act. (for IGS-P9164FX series)
100/1000Base-X SFP Port IndicatorGreen for port Link/Act. (for IGS-P9164GC series)
Fault contact
RelayRelay output to carry capacity of 1A at 24VDC on 3-pin terminal block
Redundant Input PowerLV model : Dual power inputs. 12~48VDC on 2-pin terminal block
HV model : Dual power inputs. 85~264VAC/88~373VDC on 3-pin terminal block
Power Consumption (Typ.)LV : 18Watts
HV : 18.5Watts
LV : 21Watts
HV : 20.7Watts
LV : 18Watts
HV : 18.5Watts
LV : 21Watts
HV : 19.3Watts
LV : 17Watts
HV : 18Watts
Overload Current Protection


Reverse Polarity Protection


Physical Characteristics
Dimensions (W x D x H)115 (W) x 159 (D) x 154 (H)mm (4.53 x 6.3 x 6.06 inch)
Weight (g)LV Model : 1780 g
HV Model : 2216 g
LV Model : 1769 g
HV Model : 2205 g
LV Model : 1780 g
HV Model : 2216 g
LV Model : 1769 g
HV Model : 2205 g
LV Model : 1750 g
HV Model : 2186 G
Storage Temperature-40 to 85°C (-40 to 185°F)
Operating Temperature-40 to 75°C (-40 to 167°F )
Operating Humidity5% to 95% Non-condensing
Regulatory Approvals
Power AutomationIEC 61850-3, IEEE 1613
EMIFCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4)
EMSIEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11
Free FallIEC60068-2-32