O-RGS-P9000-HV
Industrial IEC 61850-3 modular rackmount managed Gigabit Ethernet switch with 4 slots, high-voltage power input
- Modular designed makes network planning easy
- Supports O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) for Ethernet Redundancy
- O-Chain allow multiple redundant network rings
- Support standard IEC 62439-2 MRP (Media Redundancy Protocol) function (This function is available by request only)
- Support IEEE 1588v2 clock Synchronization
Datasheet
Product Specification
| Model | RGS-P9000-LV | RGS-P9000-HV |
| Physical Ports | ||
| Slot Number | 4 (up to 3 slots for 8x1G ports and 1 slot for 4x10G port) | |
| Technology | ||
| Ethernet Standards | IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX and 100Base-FX IEEE 802.3ab for 1000Base-T IEEE 802.z for 1000Base-X IEEE 802.3ae for 10Gigabit Ethernet IEEE 802.3x for Flow control IEEE 802.3ad for LACP (Link Aggregation Control Protocol ) IEEE 802.1p for COS (Class of Service) IEEE 802.1Q for VLAN Tagging IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol) IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol) IEEE 802.1x for Authentication IEEE 802.1AB for LLDP (Link Layer Discovery Protocol) | |
| MAC Table | 32K | |
| Priority Queues | 8 | |
| Processing | Store-and-Forward | |
| Switch Properties | Switching latency: 7 us Switching bandwidth: 128Gbps Max. Number of Available VLANs: 4095 VLAN ID Range : 1 to 4094 IGMP multicast groups: 128 for each VLAN Port rate limiting: User Define | |
| Jumbo frame | Up to 10K Bytes | |
| Security Featues | Device Binding security feature Enable/disable ports, MAC based port security Port based network access control (802.1x) MAC-based authentication MAC address limit VLAN (802.1Q ) to segregate and secure network traffic Radius centralized password management SNMPv3 encrypted authentication and access security Https / SSH enhance network security Web and CLI authentication and authorization IP source guard | |
| Software Features | IEEE 1588v2 clock synchronization IEEE 802.1D Bridge, auto MAC address learning/aging and MAC address (static) Multiple Registration Protocol (MRP) MSTP (RSTP/STP compatible) Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units TOS/Diffserv supported Quality of Service (802.1p) for real-time traffic VLAN (802.1Q) with VLAN tagging IGMP v2/v3 Snooping IP-based bandwidth management Application-based QoS management DOS/DDOS auto prevention Port configuration, status, statistics, monitoring, security DHCP Server/Client DHCP Relay Modbus TCP SMTP Client SNTP Server | |
| Network Redundancy | O-Ring O-Chain *note MRP MSTP(RSTP/STP compatible) | |
| RS-232 Serial Console Port | RS-232 in RJ-45 connector with console cable. 115200bps, 8, N, 1 | |
| LED Indicators | ||
| Power Indicator (PWR) | Green : Indicates that the system ready. The LED is blinking when the system is upgrading firmware | |
| Power Indicator (PWR1 / PWR2) | Green : Power LED x 2 | |
| Ring Master Indicator (R.M.) | Green : Indicates that the system is operating in O-Ring Master mode | |
| O-Ring Indicator (Ring) | Green : Indicates that the system operating in O-Ring mode Green Blinking : Indicates that the Ring is broken. | |
| Fault Indicator (Fault) | Amber : Indicate unexpected event occurred | |
| Reset To Default Running Indicator (DEF) | Green : System resets to default configuration | |
| Supervisor Login Indicator (RMT) | Green : System is accessed remotely | |
| Smart LED Display system | Link/Act(LK/ACT) / Speed(SPD) / Duplex(FDX) / Remote (RMT) green LED indicator x 4 Mode select Button (MODE) : Link/Act(LK/ACT) / Speed(SPD) / Duplex(FDX) / Remote (RMT) mode select button Port 1 ~ 28 Link/Act(LK/ACT) LED show : Green x 28 | |
| Fault Contact | ||
| Relay | Relay output to carry capacity of 1A at 24VDC | |
| Power | ||
| Redundant power input modular | Dual 24/48VDC (24~72VDC) power inputs at terminal block (Note 2) | Dual 100~240VAC / 100~370VDC power inputs at terminal block |
| Power Consumption (Typ.) | 46Watts max. | 43.5Watts max. |
| Overload Current Protection | Present | |
| Physical Characteristics | ||
| Enclosure | 19 inches rack mountable | |
| Dimensions (W x D x H) | 440 (W) x 325 (D) x 44 (H) mm (17.32x12.8x1.73 inches) | |
| Weight (g) | 6450 g | 6600 g |
| MTBF(mean time between failures) | ||
| Time | 246,537hrs (Note 1) | 246,537hrs (Note 1) |
| Environmental | ||
| Storage Temperature | -40 to 85°C (-40 to 185°F) | |
| Operating Temperature | 24VDC~36VDC 10G SFP+ module absent : -40 to 75°C | 10G SFP+ module absent : -40 to 85°C 10G SFP+ module used: -20 to 60 °C |
| 24VDC~36VDC 10G SFP+ module used: -20 to 50 °C | ||
| 36VDC~72VDC 10G SFP+ module absent : -40 to 85°C | ||
| 36VDC~72VDC 10G SFP+ module used: -20 to 60 °C | ||
| Operating Humidity | 5% to 95% Non-condensing | |
| Regulatory Approvals | ||
| Power Automation | IEC 61850-3, IEEE 1613 | |
| EMI | FCC Part 15, CISPR (EN55022) class A | |
| EMS | IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11 | |
| EMC | EN50121-4 (EN50121-1) | |
| Safety | UL 60950-1 | |
| Transport | NEMA TS1&TS2 | |