O-RGS-92222GCP-NP
Industrial 26-port managed Gigabit Ethernet switch. 22x10/100/1000 Base-T(X), 2xGigabit combo, 2x100/1000 Base-X, SFP
- Support O-Ring (recovery time < 30ms over 250 units of connection) and MSTP(RSTP/STP compatible) for Ethernet Redundancy
- Open-Ring support the other vendor's ring technology in open architecture
- O-Chain allow multiple redundant network rings
- Support standard IEC 62439-2 MRP (Media Redundancy Protocol) function (This function is available by request only)
- Support IPV6 new internet protocol version
- Support Modbus TCP protocol
- Support IEEE 802.3az Energy-Efficient Ethernet technology
- Provided HTTPS/SSH protocol to enhance network security
- Support SMTP client and NTP server protocol
Datasheet
Product Specification
| Model | RGS-92222GCP-NP | RGS-92222GCP-NP-E |
| Physical Ports | ||
| 10/100/1000Base-T(X) with Ports in RJ45 Auto MDI/MDIX | 22 | |
| Gigabit Combo port with 10/100/1000Base-T(X) and 100/1000Base-X SFP ports | 2 | |
| 100/1000Base-X with SFP port | 2 | |
| Technology | ||
| Ethernet Standards | IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX and 100Base-FX IEEE 802.3ab for 1000Base-T IEEE 802.3z for 1000Base-X IEEE 802.3x for Flow control IEEE 802.3ad for LACP (Link Aggregation Control Protocol ) IEEE 802.1p for COS (Class of Service) IEEE 802.1Q for VLAN Tagging IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol) IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol) IEEE 802.1x for Authentication IEEE 802.1AB for LLDP (Link Layer Discovery Protocol) | |
| MAC Table | 8K | |
| Priority Queues | 4 | |
| Processing | Store-and-Forward | |
| Switch Properties | Switching latency: 7 us Switching bandwidth: 52Gbps Max. Number of Available VLANs: 4095 VLAN ID Range : VID 1 to 4094 IGMP multicast groups: 256 for each VLAN Port rate limiting: User Define | |
| Jumbo frame | Up to 9.6K Bytes | |
| Security Featues | Device Binding security feature Enable/disable ports, MAC based port security Port based network access control (802.1x) Single 802.1x and Multiple 802.1x MAC-based authentication QoS assignment MAC address limit TACACS+ VLAN (802.1Q ) to segregate and secure network traffic Radius centralized password management SNMPv3 encrypted authentication and access security Https / SSH enhance network security Web and CLI authentication and authorization IP source guard | |
| Software Features | IEEE 802.1D Bridge, auto MAC address learning/aging and MAC address (static) Multiple Registration Protocol (MRP) MSTP (RSTP/STP compatible) Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units TOS/Diffserv supported Quality of Service (802.1p) for real-time traffic VLAN (802.1Q) with VLAN tagging IGMP v2/v3 Snooping IP-based bandwidth management Application-based QoS management DOS/DDOS auto prevention Port configuration, status, statistics, monitoring, security DHCP Server/Client DHCP Relay Modbus TCP DNS client proxy SMTP Client NTP server | |
| Network Redundancy | O-Ring Open-Ring O-Chain MRP (This function is available by request only) Fast Recovery MSTP (RSTP/STP compatible) | |
| RS-232 Serial Console Port | RS-232 in DB-9 connector with console cable. 115200bps, 8, N, 1 | |
| LED Indicators | ||
| Power Indicator | Green : Power indicator | Green LED x 3 : Power indicator for AC and DC |
| Ring Master Indicator | Green : Indicates that the system is operating in O-Ring Master mode | |
| O-Ring Indicator | Green : Indicates that the system operating in O-Ring mode Green Blinking : Indicates that the Ring is broken. | |
| Fault Indicator | None | Amber : Indicate unexpected event occurred |
| 10/100/1000Base-T(X) RJ45 Port Indicator | Green for Link/Act indicator. Dual color LED for speed indicator : Green for 1000Mbps, Amber for 100Mbps, Off-light for 10Mbps | |
| 100/1000Base-X SFP Port Indicator | Green for port Link/Act. | |
| Fault Contact | ||
| Relay | None | Relay output to carry capacity of 1A at 24VDC |
| Power | ||
| Power Input | 100 ~ 240VAC with power cord | 100~240VAC with power cord, and dual 48VDC(36~72VDC) power inputs at 6-pin terminal block |
| Power Consumption (Typ.) | 22 Watts | 23 Watts |
| Overload Current Protection | Present | |
| Reverse Polarity Protection | Not Present | Present on DC only |
| Physical Characteristics | ||
| Enclosure | 19 inches rack mountable | |
| Dimensions (W x D x H) | 443.7 x 200 x 44mm (17.47 x 7.87 x 1.73 inch) | 431 x 342 x 44mm (17 x 13.46 x 1.73 inch) |
| Weight (g) | 2850 g | 4360 g |
| Environmental | ||
| Storage Temperature | -40 to 85°C (-40 to 185°F) | |
| Operating Temperature | -40 to 75°C (-40 to 167°F) | |
| Operating Humidity | 5% to 95% Non-condensing | |
| Regulatory Approvals | ||
| EMI | FCC Part 15, CISPR (EN55022) class A | |
| EMS | IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11 | |
| Shock | IEC60068-2-27 | |
| Free Fall | IEC60068-2-32 | |
| Vibration | IEC60068-2-6 | |
| Safety | EN60950-1 | |