SY-Multi-8/LPCIe COMBO
8 ports serial communication card
- 8 ports serial communication card
- Supports PCI Express Base Specification v1.1 and v2.0
- The world’s leading 256 byte FIFO
- Communication speed: Up to 921.6kbps
- Auto Toggling: Automatic control of BUS I/O for RS422/RS485
- Slew-Rate Limit Control
- ±15kV Surge protection
Product Specification
| Interface Type | |
| Specification | PCI Express Base Specification Rev. 2.0 |
| Serial | |
| Interface | RS422/RS485 (Combo) |
| Number of ports | 8 |
| Maximum Speed | 921.6Kbps |
| Signal Lines | RS422: TXD+, TXD-, RXD+, RXD- RS485: TRXD+, TRXD- |
| Surge Protection | 15KV Surge protection |
| Flow Control | XON/XOFF |
| Data crash prevent | Auto Toggling |
| Hardware | |
| Controller | SB16C1058PCI |
| Board Connector | DB-44P (DB44 Male) |
| Panel Connector | DE-09S (DB9 Female) |
| Software | |
| Supported OS | Windows 7/8.1/10 Windows Server 2008/2012/2016 Linux |
| Utility | TestView |
| Operating Environment | |
| Operation Temperature | 0 ~ 50 °C |
| Storing Temperature | -20 ~ 80 °C |
| Humidity | 5 ~ 95% Non-Condensing |
| Certifications | |
| Certificates | CE, FCC, KC |
The Multi-port boards support widely used, Windows and Linux operating systems and include 15,000 volt surge suppression. The Multi-8/LPCIe can be attached to 8 ports panel with DE-09 (DB-9) connectors which is available in two models, RS232 and RS422/RS485. These boards are ideal for POS, hospital, factory automation and building automation and many other applications.
Connector Panel:
- The Multi-8/LPCIe consists of a low profile communication card and connector panel with support for either RS232 or RS422/RS485. The connector panel has 8 DE-09S (DB-9 female) connectors to protect against the pins being electrically shorted. LEDs next to each connector provide visual communication status of the ports. It is constructed of aluminium and is suitable for industrial environments.
Slew-Rate Limit Control
- The Multi-8/LPCIe is equipped with Slew Rate Limit Control and when enabled, it minimizes EMI emissions which may cause data transmission errors. When Slew Rate is used maximum communication speed is 250Kbps. This function is recommended in many medical applications.