O-IDS-322

Industrial 2 secure serial port to Ethernet device server with 2xRS-232/422/485 and 2x10/100Base-T(X)

Anewtech Systems Industrial Serial to Ethernet Device Server Oring O-IDS-322
  • Operating Modes: Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP
  • Support 2xRS-232/422/485 in DB9 connector
  • Redundant multiple host devices:
    •  5 host devices: Virtual COM, TCP Server, TCP Client mode;
    • 4 IP ranges: UDP
  • Security: SSL data encryption; secured management by HTTPS and SSH:IP Access: IP White List
  • Event Warning by Syslog, Email, SNMP trap, Relay and Beeper
  • Ethernet switch mode enable Daisy Chain
  • 1KV isolation for PoE PD port (IDS-322+)
Datasheet
Product Specification
ModelIDS-322IDS-322+
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX2
P.O.E. P.O.E.Present at ETH1
Power Device (IEEE 802.3af):
IEEE 802.3af compliant input interface
Over load & short circuit protection
Isolation Voltage: 1000 VDC min.
Isolation Resistance : 108 ohms min
Serial Ports
ConnectorDB9 x 4
Operation ModeRS-232/422/485
Serial Baud Rate110 bps to 460.8 Kbps
Data Bits7, 8
Parityodd, even, none, mark, space
Stop Bits1, 1.5, 2
RS-232TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
Flow ControlXON/XOFF, RTS/CTS, DTR/DSR
Network Protocol
ProtocolICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP V1/V2c, HTTPS, SMTP
LED Indicators
Power Indicator3 x LEDs, PWR 1(2)(PoE) / Ready:
Green On: Power is on
10/100/1000 RJ45 port indicatorGreen for port Link/Act at 100Mbps.
Serial TX / RX LEDsRed: Serial port is receiving data
Green: Serial port is transmitting data
Power
Redundant Input PowerDual DC inputs. 12-48VDC on 6-pin terminal blockDual DC inputs. 12-48VDC on 6-pin terminal block
IEEE 802.3af PoE PD (Eth 1)
Power Consumption (Typ.)3.84W
Overload Current ProtectionPresent
Reverse Polarity ProtectionPresent on terminal block
Physical Characteristics
EnclosureIP-30
Dimensions (W x D x H)45 (W) x 81 (D) x 95 (H) mm
Weight (g)316g325g
Environmental
Storage Temperature-40 to 85°C (-40 to 185°F)
Operating Temperature-40 to 70°C (-40 to 158°F)
Operating Humidity5% to 95% Non-condensing
Regulatory Approvals
EMIFCC Part 15, CISPR (EN55022) class A
EMSIEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11
ShockIEC60068-2-27
Free FallIEC60068-2-32
VibrationIEC60068-2-6
SafetyEN60950-1