O-IAP-420

Industrial IEEE 802.11 b/g/n wireless access point with 2x10/100Base-T(X)

Anewtech Systems Cellular Router  ORing Wireless Access Point O-IAP-420
  • High Speed Air Connectivity: WLAN interface support up to 150 Mbps link speed
  • Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/WPA2/WPA2-PSK(TKIP,AES)/802.1X Authentication supported
  • Provide 2 port 10/100Base-T(X) Ethernet ports
  • Support X-Roaming < 100 ms
  • Support AP/Client/Bridge/AP-Client Mode
  • Support Multiple-SSID to 4 SSID
  • Secured Management by HTTPs
  • Wireless connecting status monitoring
Datasheet
Product Specification
ModelIAP-420IAP-420+
Physical Ports
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX2
PoE P.D. Port-

Present at ETH
Fully compliant with IEEE 802.3af Power Device specification
Over load & short circuit protection
Isolation Voltage: 1000 VDC min.
Isolation Resistance : 108 ohms min

WLAN Interface
Operating ModeAP/Client/Bridge/AP-Client
Antenna and Connector1 x External reverse SMA-type antenna connector
Radio Frequency TypeDSSS, OFDM
ModulationIEEE802.11b: CCK, DQPSK, DBPSK
IEEE802.11g/n: OFDM with BPSK, QPSK, 16QAM, 64QAM
Frequency BandAmerica / FCC:
2.412~2.462 GHz (11 channels )
Europe CE / ETSI:
2.412~2.472 GHz ( 13 channels )
Transmission Rate802.11b: 1/2/5.5/11 Mbps
802.11g: 6/9/12/18/24/36/48/54 Mbps
802.11n(40MHz): UP to 150 Mbps
Transmit Power802.11b: 19dBm ±1.5dBm
802.11g: 17dBm ±1.5dBm
802.11n(2.4G@20MHz): 16.5dBm ±1.5dBm
802.11n(2.4G@40MHz): 14.5dBm ±1.5dBm
Receiver Sensitivity802.11b: -90dBm ±2dBm@1Mbps
802.11g: -72dBm ±2dBm@54Mbps
802.11n(2.4G@40MHz,MCS7): -68dBm ±2dBm
Encryption SecurityWEP: (64-bit, 128-bit key supported)
WPA/WPA2:802.11i (WEP and AES encryption)
WPA-PSK (256-bit key pre-shared key supported)
802.1X Authentication supported
TKIP encryption
Wireless SecuritySSID broadcast disable and enable
Protocol Support
ProtocolARP,BOOTP, DHCP, DNS, HTTP, IP, ICMP, SNTP, TCP, UDP, 802.1X, SNMP, STP
LED Indicators
Power IndicatorLED x 3, PWR 1, 2, (PoE):
Green On: Power is on and functioning Normally.
10/100Base-T(X) RJ45 Port IndicatorLED x 2 , Green for port Link/Act at 100Mbps.
WLAN LEDsWLAN Link /ACT: Green: Blinking
Power
Redundant Input PowerDual DC inputs. 12~48VDC on 4-pin terminal block
Power Consumption (Typ.)4 Watts
Overload Current ProtectionPresent
Reverse Polarity ProtectionPresent
Physical Characteristics
EnclosureIP-30
Dimensions (W x D x H)41(W)x81(D)x95(H) mm
Weight (g)292 g297 g
Environmental
Storage Temperature-40 to 85°C (-40 to 185°F)
Operating Temperature-10 to 60°C(14 to 140°F)
Operating Humidity5% to 95% Non-condensing
Regulatory Approvals
EMIFCC Part 15, CISPR (EN55022) class A
EMSIEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11
ShockIEC60068-2-27
Free FallIEC60068-2-31
VibrationIEC60068-2-6
SafetyEN60950-1