WM-W10IM3S-PCH2AC-POE
10.1" ARM A53 S Series HMI Panel PC

Features
- 10.1” 1280 x 800 Resolution with Projected Capacitive Multi-Touch (P-CAP)
- Fanless cooling system and ultra low power consumption
- Support PoE function
- Optional 2MP Front Camera
- Optional HF RFID Reader
- Stylish design for room booking, access control, and room information applications
- Front IP65 Water and Dust Proof
- Built-in RGB LED Light Bar Indicator
Datasheet
Enquiry
Specification
Display | |
Size | 10.1 inches |
Touch / Glass | Projected Capacitive Multi Touch Screen |
Resolution | 1280x800 |
Panel Brightness | 350 nits 1000 nits(Optional) |
Contrast Ratio | 800:1 |
View Angles | 85,85,85,85 |
Active Area | 216.96 x135.6 mm |
System Specification | |
Processor | ARM A53 Quad Core 2.0GHz |
Memory | 4GB LPDDR4 |
Storage | 32GB eMMC |
Operating System | Android 11 |
WLAN | Support (Optional) |
BT | Support (Optional) |
RFID | HF RFID Reader 13.56 MHz (Optional) |
Light Bar | Built-in RGB LED Status Light Bar, on both sides |
Mechanical | |
Dimension | 264 x 173 x 36 mm |
Cut out | 250x159mm |
Mounting | Panel Mount, VESA Mount |
Enclosure | Aluminum |
Cooling System | Fanless design |
Environment | |
Operating Humidity | 10% to 90% (noncondensing) |
Operating Temperature | 0~50°C |
Storage Temperature | -20~60°C |
Shock | MIL-STD-810G Method 516.6 |
Vibration | MIL-STD-810G Method 514.6 |
IP rating | Front IP65 |
Certification | |
Certification | CE, FCC |
IO Ports | |
USB Port | 2 x USB 2.0 Type A 1 x Micro USB 2.0 OTG |
Serial Port | 1 x RS232/422/485 (Default RS232) |
LAN | 1 x LAN 10/100/1000 Mbps |
Video | 1 x Micro HDMI Output (Optional) |
Audio | 1 x Speaker |
SD Card Slot | 1 x Micro SD card slot (Max to 32GB) |
Accessory | |
Accessory | 100~240V AC to DC Adapter Power Cord Terminal Block to 2.5Ø Female Adapter Cable Open Wire Cable with terminal block connector Manual VESA screws |
Power | |
Power Rating | 12V DC with Terminal Block 9~36V (Optional) |
Adapter | 12V 50W |
POE | PoE (PD): follows IEEE 802.3at (25 W) |
Camera | |
Front Camera | 2MP Camera (Optional) |
Highlights:
Power over Ethernet (Data and Power connections in a single cable)
The hardware installation becomes easier with Power over Ethernet. PoE reduces the number of cables needed for the connection of various devices. This infrastructure allows for centralized power management; therefore, it is a cost-effective solution for access control, home, and industrial automation.
Stylish Design
S-series HMI is 35% thinner than a traditional Panel PC. With the slim design, it has an aesthetically pleasing look that fits modern interiors and exteriors. Its true flat surface is not only for a stylish look but easy to maintain and clean. No more clogged dust on the edges.
P-Cap Touch (Resistant to scratches)
The glass cover lens provides great protection from scratches. P-Cap Touch supports 4-point multi-touch and can easily be controlled by fingers. This technology allows enjoying every touch and improving the convenience of using the device. Thus, it helps to enhance the overall customer experience.
LED Light Bar (Indicates the status of the machine or process afar) and HF RFID/NFC (Limited Access Control)
LED Light Bar is designed to control the status of the running processes afar, yet saving energy by keeping a display turned off. The settings are easily programmable according to your preferences. Choose one of the four colors - red, green, blue, or orange to send valuable messages based on your settings. Also, HF RFID/NFC helps to limit the access to only the personnel in charge. Greater control for security purposes is now available with S-Series HMI.
Front IP65 (Water and Dust Proof)
The HMI is sealed with IP65 on the front side and is protected against possible damages from outer dust and water splash.