AS-2124US-TNRP
2U Ultra DP AMD Server, 24 hot-swap 2.5" U.2 NVMe drive bays
- Dual AMD EPYC™ 7002 Series Processors
- 8TB Registered ECC DDR4 3200MHz SDRAM in 32 DIMMs
- Expansion slots: 1 PCI-E 4.0 x16 slot (FH, 9.5" L)
- Integrated IPMI 2.0 + KVM with dedicated LAN, Software Out of Band License key (SFT-OOB-LIC) included for OOB BIOS management
- Dual-port 10GBase-T and Dual-port 10G SFP+ via Intel® X710-TM4
- Drive Bays: 24 hot-swap 2.5" U.2 NVMe drive bays. Up to 24 SATA/SAS drive support via optional SAS kit
- 1600W Redundant Power Supplies Titanium Level (96%)
Product Specification
| Product SKUs | |
| AS -2124US-TNRP | A+ Server 2124US-TNRP |
| Motherboard | H12DSU-iN |
| Processor/Chipset | |
| CPU | Dual AMD EPYC™ 7002 series Processors Socket SP3 Supports CPU TDP up to 280W* |
| Cores | Up to 64 Cores |
| Chipset | System on Chip (SoC) |
| System Memory | |
| Memory Capacity | 32 DIMM slots Supports up to 8TB Registered ECC DDR4 3200MHz SDRAM 8-channel memory bus |
| Memory Type | DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs |
| DIMM Sizes | 4GB, 8GB, 16GB, 32GB, 64GB, 128GB, 256GB |
| Memory Voltage | 1.2V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
| On-Board Devices | |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2500 BMC |
| Network Connectivity | Dual-port 10GBase-T and Dual-port 10G SFP+ via Intel® X710-TM4 |
| VGA | ASPEED AST2500 BMC |
| Input / Output | |
| NVMe | 24 U.2 NVMe support |
| LAN | Dual 10GBase-T LAN ports Dual 10G SFP+ LAN ports 1 RJ45 Dedicated IPMI LAN port |
| USB | 3 USB 3.0 ports (2 rear + 1 Type A) |
| VGA | 2 VGA ports (1 rear, 1 onboard) |
| Others | 1 COM port 2 SATA DOM power connectors TPM 2.0 header |
| System BIOS | |
| BIOS Type | AMI 128Mb SPI Flash EEPROM |
| BIOS Features | Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 5.1 USB Keyboard Support SMBIOS 3.1.1 |
| PC Health Monitoring | |
| CPU | Monitors CPU Core Voltages, +12V, +3.3V, +5V, +5V standby, 3.3V standby, VBAT CPU switching voltage regulator |
| FAN | Up to 4-fan status tachometer monitoring Up to four 4-pin fan headers Status monitor for speed control Pulse Width Modulated (PWM) fan connectors |
| Temperature | Monitoring for CPU and chassis environment CPU Thermal Trip Support Thermal control for 4x Fan connectors I²C Temperature Sensing Logic |
| LED | CPU / System Overheat LED |
| Other Features | Chassis Intrusion Detection Chassis Intrusion Header |
| Chassis | |
| Form Factor | 2U |
| Model | CSE-219U2TS-R1K62P3-TN24 |
| Dimensions | |
| Height | 3.5" (89mm) |
| Width | 17.2" (437mm) |
| Depth | 28.46" (723mm) |
| Weight | Net Weight: 39 lbs (17.7 kg) Gross Weight: 63 lbs (28.6 kg) |
| Front Panel | |
| Buttons | Power On/Off button System Reset button |
| LEDs | Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED / Fan fail LED / UID LED |
| Expansion Slots | |
| PCI-Express | 1 PCI-E 4.0 x16 slot (FH, 9.5" L) (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. |
| Drive Bays | |
| Hot-swap | 24 hot-swap 2.5" U.2 NVMe drive bays Up to 24 SAS/SATA drives supported via optional SAS kit |
| System Cooling | |
| Fans | 4 heavy-duty PWM fans with optimal fan speed control |
| Air Shroud | 1 Air Shroud |
| Power Supply | |
| 1600W Redundant Power Supplies with PMBus | 1600W/1000W |
| Dimension (W x H x L) | 73.5 x 40 x 203 mm |
| Input | 100-127Vac / 13 - 9A / 50-60Hz 200-240Vac / 10 - 8A / 50-60Hz |
| +12V | Max: 83.3A / Min: 0A (100-127Vac) Max: 133A / Min: 0A (200-240Vac) |
| 12Vsb | Max: 2.1A / Min: 0A |
| Output Type | 25 Pairs Gold Finger Connector |
| Certification | Titanium Level |
| Operating Environment / Compliance | |
| RoHS | RoHS Compliant |
| Environmental Spec. | Operating Temperature: 10°C to 35°C Non-operating Temperature: -40°C to 70°C Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) |