SSG-6049P-E1CR45H
4U Storage Server. Dual Socket P support 2nd Gen. Intel® Xeon® Scalable processors
- Dual Socket P (LGA 3647) support 2nd Gen. Intel® Xeon® Scalable processors (Cascade Lake/Skylake)‡
- 24 DIMMs; up to 6TB 3DS ECC DDR4-2933MHz† RDIMM/LRDIMM, Supports Intel® Optane™ DCPMM††
- 2 PCI-E 3.0 x16, 1 PCI-E 3.0 x8, 1 SIOM card support (flexible networking)
- 45 Hot-swap 3.5" SAS3/SATA3 drive bays with SES3; 2 rear Hot-swap 2.5" drive bays; optional 6 NVMe bays
- Broadcom 3108 SAS3, HW RAID
- Server remote management: IPMI 2.0 / KVM over LAN / Media over LAN
- 5 Hot-swap 8cm rear exhaust PWM fans
- 1600W Redundant Power Supplies Platinum Level (94%)
Product Specification
| Product SKU | |
| SSG-6049P-E1CR45H | SuperStorage 6049P-E1CR45H |
| Motherboard | Super X11DSC+ |
| Processor/Cache | |
| CPU | Dual Socket P (LGA 3647) 2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake)‡,3 UPI up to 10.4GT/s Support CPU TDP 70-205W |
| Cores | Up to 28 Cores |
| Note | ‡ BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors |
| System Memory | |
| Memory Capacity | 24 DIMM slots Up to 6TB 3DS ECC DDR4-2933MHz† RDIMM/LRDIMM Supports Intel® Optane™ DCPMM†† |
| Memory Type | 2933†/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM |
| Note | † 2933MHz in two DIMMs per channel can be achieved by using memory purchased from us†† Cascade Lake only. |
| On-Board Devices | |
| Chipset | Intel® C621 chipset |
| SAS | SAS3 (12Gbps) via Broadcom 3108; HW RAID RAID 0, 1, 5, 6, 10, 50, 60 |
| SATA | SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
| Graphics | ASPEED AST2500 BMC |
| Input / Output | |
| Serial ATA | 4 SATA3 (6Gbps) ports |
| LAN | 1 RJ45 Dedicated IPMI LAN port |
| USB | 2 USB 3.0 ports (rear) 1 Type A |
| VGA | 1 VGA D-Sub connector port |
| Serial Port / Header | 1 Fast UART 16550 port / 1 Header |
| System BIOS | |
| BIOS Type | AMI UEFI |
| Management | |
| Software | Intel® Node Manager IPMI 2.0 NMI SSM, SPM, SUM SuperDoctor® 5 Watchdog |
| PC Health Monitoring | |
| CPU | Monitors for CPU Cores, Chipset Voltages, Memory. 4+1 Phase-switching voltage regulator |
| FAN | Fans with tachometer monitoring Status monitor for speed control Pulse Width Modulated (PWM) fan connectors |
| Temperature | Monitoring for CPU and chassis environment Thermal Control for fan connectors |
| Chassis | |
| Form Factor | 4U Rackmount |
| Model | CSE-946LTS-R1K66P1 |
| Dimensions | |
| Width | 17.2" (437mm) |
| Height | 7" (178mm) |
| Depth | 26" (660mm) |
| Available Colors | Black |
| Front Panel | |
| Buttons | Power On/Off button System Reset button |
| LEDs | Power status LED Hard drive activity LED Network activity LEDs System Information LED Power fail LED |
| Expansion Slots | |
| PCI-Express | 2 PCI-E 3.0 x16 slots 1 PCI-E 3.0 x8 slot 1 SIOM card support(must bundle with network card |
| Drive Bays | |
| Hot-swap | 45 Hot-swap 3.5" SAS3/SATA3 drive bays 2 Rear Hot-swap 2.5" SATA drive bays |
| Optional | 6 NVMe bays (optional |
| Backplane | SAS3/SATA3 single expander per backplane |
| System Cooling | |
| Fans | 5 Hot-swap 8cm rear exhaust PWM fans |
| Power Supply | 1600W 1U Redundant Power Supplies with PMBus |
| Total Output Power | 1000W/1600W |
| Dimension (W x H x L) | 73.5 x 40 x 265 mm |
| Input | 100-127Vac / 12.9A Max / 50-60Hz 200-240Vac / 9.5A Max / 50-60Hz |
| +12V | Max: 82A / Min: 0.1A (100-127Vac) Max: 132A / Min: 0.1A (200-240Vac |
| 12V SB | Max: 2A / Min: 0.2A |
| Output Type | 25 Pairs Gold Finger Connector |
| Certification | Platinum Level |
| Operating Environment | |
| RoHS | RoHS Compliant |
| Environmental Spec. | Operating Temperature:10°C ~ 35°C (50°F ~ 95°F) Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing |
| Compliance | FCC, CE, RCM, VCCI, UL and CB |