SSG-6049P-E1CR60H
4U Storage Server. Dual Socket P support 2nd Gen. Intel® Xeon® Scalable processors
- Dual Socket P (LGA 3647) support 2nd Gen. Intel® Xeon® Scalable processors (Cascade Lake/Skylake)‡
- 24 DIMMs; up to 6TB 3DS ECC DDR4-2933MHz† RDIMM/LRDIMM, Supports Intel® Optane™ DCPMM††
- 2 PCI-E 3.0 x16, 1 PCI-E 3.0 x8, 1 SIOM card support (flexible networking) Note: must bundle with Network card
- 60 Hot-swap 3.5" SAS3/SATA3 drive bays with SES3; 2 rear Hot-swap 2.5" drive bays
- Broadcom 3108 SAS3, HW RAID
- Server remote management: IPMI 2.0 / KVM over LAN / Media over LAN
- 5 Hot-swap 8cm rear exhaust PWM fans
- 2000W Redundant Power Supplies Titanium Level (96%)
Product Specification
| Product SKUs | |
| SSG-6049P-E1CR60H | SuperStorage 6049P-E1CR60H |
| Motherboard | Super X11DSC+ |
| Processor/Cache | |
| CPU | Dual Socket P (LGA 3647) 2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake)‡,3 UPI up to 10.4GT/s Support CPU TDP 70-205W |
| Cores | Up to 28 Cores |
| Note | ‡ BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors |
| System Memory | |
| Memory Capacity | 24 DIMM slots Up to 6TB 3DS ECC DDR4-2933MHz† RDIMM/LRDIMM Supports Intel® Optane™ DCPMM†† |
| Memory Type | 2933†/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM |
| Note | † 2933MHz in two DIMMs per channel can be achieved by using memory purchased from us†† Cascade Lake only. |
| On-Board Devices | |
| Chipset | Intel® C621 chipset |
| SAS | SAS3 (12Gbps) via Broadcom 3108; HW RAID RAID 0, 1, 5, 6, 10, 50, 60 |
| SATA | SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
| Graphics | ASPEED AST2500 BMC |
| Input / Output | |
| Serial ATA | 4 SATA3 (6Gbps) ports |
| LAN | 1 RJ45 Dedicated IPMI LAN port |
| USB | 2 USB 3.0 ports (rear) 1 Type A |
| VGA | 1 VGA D-Sub connector port |
| Serial Port / Header | 1 Fast UART 16550 port / 1 Header |
| System BIOS | |
| BIOS Type | AMI UEFI |
| Management | |
| Software | Intel® Node Manager IPMI 2.0 NMI SSM, SPM, SUM SuperDoctor® 5 Watchdog |
| PC Health Monitoring | |
| CPU | Monitors for CPU Cores, Chipset Voltages, Memory. 4+1 Phase-switching voltage regulator |
| FAN | Fans with tachometer monitoring Status monitor for speed control Pulse Width Modulated (PWM) fan connectors |
| Temperature | Monitoring for CPU and chassis environment Thermal Control for fan connectors |
| Chassis | |
| Form Factor | 4U Rackmount |
| Model | CSE-946STS-R2K05P |
| Dimensions | |
| Width | 17.2" (437mm) |
| Height | 7" (178mm) |
| Depth | 30.2" (767mm) |
| Weight | Gross Weight: 170.5 lbs (77.3kg) Net Weight: 118 lbs (53.5 kg) |
| Available Colors | Black |
| Front Panel | |
| Buttons | Power On/Off button System Reset button |
| LEDs | Power status LED Hard drive activity LED Network activity LEDs System Information LED Power fail LED |
| Expansion Slots | |
| PCI-Express | 2 PCI-E 3.0 x16 slots 1 PCI-E 3.0 x8 slot 1 SIOM card support(must bundle with network card) |
| Drive Bays | |
| Hot-swap | 60 Hot-swap 3.5" SAS3/SATA3 drive bays 2 Rear Hot-swap 2.5" SATA drive bays |
| Backplane | SAS3/SATA3 single expander per backplane |
| System Cooling | |
| Fans | 5 Hot-swap 8cm rear exhaust PWM fans |
| Power Supply | 2000W Redundant Power Supplies with PMBus |
| Total Output Power | 1000W/1800W/1980W/2000W |
| Dimension(W x H x L) | 73.5 x 40 x 265 mm |
| Input | 100-120Vac / 12.5-9.5A / 50-60Hz 200-220Vac / 10-9.5A / 50-60Hz 220-230Vac / 10-9.8A / 50-60Hz 230-240Vac / 10-9.8A / 50-60Hz 200-240Vac / 11.8-9.8A / 50-60Hz (UL/cUL only) |
| +12V | Max: 83.3A / Min: 0A (100-120Vac) Max: 150A / Min: 0A (200-220Vac) Max: 165A / Min: 0A (220-230Vac) Max: 166.7A / Min: 0A (230-240Vac) Max: 166.7A / Min: 0A (200-240Vac) (UL/cUL only) |
| 12Vsb | Max: 2.1A / Min: 0A |
| Output Type | 25 Pairs Gold Finger Connector |
| Certification | Titanium Level |
| Operating Environment | |
| RoHS | RoHS Compliant |
| Environmental Spec. | Operating Temperature: 10°C ~ 35°C (50°F ~ 95°F) Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) |