SYS-F619P2-RC0
8 Hot-plug System Nodes in 4U Server. 6 Hot-swap 2.5" SAS3/SATA3
8 Hot-plug System Nodes in 4U. Each node supports:
- Dual Socket P (LGA 3647) support 2nd Gen. Intel® Xeon® Scalable processors (Cascade Lake/Skylake)‡
- 12 DIMMs; up to 3TB 3DS ECC. DDR4-2933MHz† RDIMM/LRDIMM, Supports Intel® Optane™ DCPMM††
- Expansion slots: 1 PCI-E 3.0 x16 (LP), 1 PCI-E 3.0 x16 (for SIOM )
- 6 Hot-swap 2.5" SAS3/SATA3 or 2 Hot-swap 2.5" SAS3/SATA3 + 4 optional NVMe U.2.
- M.2 Interface: PCI-E 3.0 x4, M.2 Form Factor: 2260, 2280, 22110, M.2 Key: M-Key
- 2200W Redundant Power Supplies Titanium Level (96% Efficiency)
Product Specification
| Product SKU | |
| SYS-F619P2-RC0 | SuperServer F619P2-RC0 |
| Motherboard | Super X11DPFR-SN |
| Processor/Cache (per Node) | |
| CPU | Dual Socket P (LGA 3647) 2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake)‡,Dual UPI up to 10.4GT/s Support CPU TDP 70-165W with IVR |
| Cores | Up to 28 Cores |
| Note | ‡ BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors |
| System Memory (per Node) | |
| Memory Capacity | 12 DIMM slots Up to 3TB 3DS ECC DDR4-2933MHz† RDIMM/LRDIMM Supports Intel® Optane™ DCPMM†† |
| Memory Type | 2933†/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM |
| Note | † 2933MHz in two DIMMs per channel can be achieved by using memory purchased from us †† Cascade Lake only. |
| On-Board Devices | |
| Chipset | Intel® C621 chipset |
| SAS | SAS3 (12Gbps) via Broadcom 3008 |
| Network Controllers | Flexible networking via SIOM |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
| Graphics | ASPEED AST2500 BMC |
| Input / Output (per node) | |
| SAS | 6 SAS3 (12Gbps) ports |
| NVMe | 4 NVMe U.2 option |
| LAN | SIOM flexible Network card 1 RJ45 Dedicated IPMI LAN port |
| USB | 2 USB 3.0 ports (rear) |
| VGA | 1 VGA port |
| System BIOS | |
| BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
| Management | |
| Software | Intel® Node Manager IPMI 2.0 KVM with dedicated LAN SuperDoctor® 5 Watch Dog |
| Power Configurations | ACPI Power Management |
| PC Health Monitoring | |
| CPU | Monitors for CPU Cores, Chipset Voltages, Memory. 4+1 Phase-switching voltage regulator |
| FAN | Fans with tachometer monitoring Status monitor for speed control Pulse Width Modulated (PWM) fan connectors |
| Temperature | Monitoring for CPU and chassis environment Thermal Control for fan connectors |
| Chassis | |
| Form Factor | 4U Rackmount |
| Model | CSE-F418BC2-R2K20BP |
| Dimensions and Weight | |
| Width | 17.63" (448mm) |
| Height | 6.96" (177mm) |
| Depth | 29" (737mm) |
| Package | 28.3" (W) x 15.0" (H) x 42.4" (D) |
| Weight | Net Weight: 150 lbs (68.04 kg) Gross Weight: 200 lbs (90.71 kg) |
| Available Colors | Black |
| Front Panel | |
| Buttons | Power On/Off button UID button |
| LEDs | Power status LED Hard drive activity LED Network activity LEDs Information LED (UID, Fan failure, Overheat) |
| Expansion Slots (per node) | |
| PCI-Express | 1 PCI-E 3.0 x16 (Low-profile) 1 PCI-E 3.0 x16 (SIOM) |
| Drive Bays (per node) | |
| Hot-swap | 6 Hot-swap 2.5" SAS3/SATA3 or 2 Hot-swap 2.5" SAS3/SATA3 + 4 optional NVMe U.2 |
| M.2 | M.2 Interface: PCI-E 3.0 x4 M.2 Form Factor: 2260, 2280, 22110 M.2 Key: M-Key |
| Backplane | 1 SAS/SATA backplane |
| System Cooling (per node) | |
| Fans | 3x 4cm 20k RPM middle fans |
| Power Supply | 2200W Redundant Power Supplies with PMBus |
| Total Output Power and Input | 1200W with Input 100-127Vac 1800W with Input 200-220Vac 1980W with Input 220-230Vac 2090W with Input 230-240Vac 2200W with Input 220-240Vac (for UL/cUL use only) 2090W with Input 230-240Vdc (for CCC only) |
| AC Input Frequency | 50-60Hz |
| Dimension (W x H x L) | 76 x 40 x 336 mm |
| +12V | Max: 100A / Min: 0A (100-127Vac) Max: 150A / Min: 0A (200-220Vac) Max: 165A / Min: 0A (220-230Vac) Max: 174.17A / Min: 0A (230-240Vac) Max: 183.3A / Min: 0A (220-240Vac) |
| 5VSB | Max: 1A / Min: 0A |
| Output Type | Backplanes (gold finger) |
| Certification | Titanium Level |
| Operating Environment | |
| RoHS | RoHS Compliant |
| Environmental Spec. | Operating Temperature: 10°C ~ 35°C (50°F ~ 95°F) Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) |