SYS-F629P3-RC0B

4 Hot-plug System Nodes in 4U Server. 8 Hot-swap 3.5" SAS3/SATA3

Anewtech Systems Supermicro Servers Supermicro Singapore Twin-Server-Supermicro-SYS-F629P3-RC0B

4 Hot-plug System Nodes in 4U. Each node supports:

  • Dual Socket P (LGA 3647) support, 2nd Gen. Intel® Xeon® Scalable processors (Cascade Lake/Skylake)‡
  • 12 DIMMs; up to 3TB 3DS ECC, DDR4-2933MHz† RDIMM/LRDIMM, Supports Intel® Optane™ DCPMM††
  • Expansion slots: 1 PCI-E 3.0 x16 (LP), 1 PCI-E 3.0 x16 (for SIOM )
  • SIOM Network card, 1 dedicated IPMI LAN port
  • 1 VGA, 2 USB 3.0 ports
  • 8 Hot-swap 3.5" SAS3/SATA3 or 6 Hot-swap 3.5" SAS3/SATA3 +  2 optional NVMe U.2
  • M.2 Interface: PCI-E 3.0 x4,  M.2 Form Factor: 2260, 2280, 22110. M.2 Key: M-Key
  • SAS3 via Broadcom 3008
  • 2x 8cm 14k RPM middle fans
  • 1200W Redundant Power Supplies Titanium Level (96% Efficiency)
Product Specification
Anewtech Systems Supermicro Servers Supermicro Singapore SuperServer F629P3-RC0B Supermicro Singapore twin-server SYS-F629P3-RC0B supermicro
Product SKU
SYS-F629P3-RC0BSuperServer F629P3-RC0B
MotherboardSuper X11DPFR-SN
Processor/Cache (per Node)
CPUDual Socket P (LGA 3647) 
2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake)‡,Dual UPI up to 10.4GT/s 
Support CPU TDP 70-165W with IVR
CoresUp to 28 Cores
Note‡ BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors
System Memory (per Node)
Memory Capacity12 DIMM slots 
Up to 3TB 3DS ECC DDR4-2933MHz† RDIMM/LRDIMM 
Supports Intel® Optane™ DCPMM††
Memory Type2933†/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note† 2933MHz in two DIMMs per channel can be achieved by using memory purchased from us 
†† Cascade Lake only.
On-Board Devices
ChipsetIntel® C621 chipset
SASSAS3 (12Gbps) via Broadcom 3008
Network ControllersFlexible networking via SIOM
IPMISupport for Intelligent Platform Management Interface v.2.0 
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
GraphicsASPEED AST2500 BMC
Input / Output (per node)
SAS8 SAS3 (12Gbps) ports
NVMe2 NVMe U.2 option
LANSIOM flexible Network card 
1 RJ45 Dedicated IPMI LAN port
USB2 USB 3.0 ports (rear)
VGA1 VGA port
System BIOS
BIOS Type128Mb SPI Flash EEPROM with AMI BIOS
Management
SoftwareIntel® Node Manager 
IPMI 2.0 
KVM with dedicated LAN 
SuperDoctor® 5 
Watch Dog
Power ConfigurationsACPI Power Management
PC Health Monitoring
CPUMonitors for CPU Cores, Chipset Voltages, Memory. 
4+1 Phase-switching voltage regulator
FANFans with tachometer monitoring 
Status monitor for speed control 
Pulse Width Modulated (PWM) fan connectors
TemperatureMonitoring for CPU and chassis environment 
Thermal Control for fan connectors
Chassis
Form Factor4U Rackmount
ModelCSE-F424AS2-R1K23BP
Dimensions and Weight
Width17.63" (448mm)
Height6.96" (177mm)
Depth29" (737mm)
Package28.3" (W) x 15.0" (H) x 42.4" (D)
WeightNet Weight: 150 lbs (68.04 kg) 
Gross Weight: 200 lbs (90.71 kg)
Available ColorsBlack
Front Panel
ButtonsPower On/Off button 
UID button
LEDsPower status LED 
Hard drive activity LED 
Network activity LEDs 
Information LED (UID, Fan failure, Overheat)
Expansion Slots (per node)
PCI-Express1 PCI-E 3.0 x16 (Low-profile) 
1 PCI-E 3.0 x16 (SIOM)
Drive Bays (per node)
Hot-swap8 Hot-swap 3.5" SAS3/SATA3 or 6 Hot-swap 3.5" SAS3/SATA3 + 2 optional NVMe U.2
M.2M.2 Interface: PCI-E 3.0 x4 
M.2 Form Factor: 2260, 2280, 22110 
M.2 Key: M-Key
Backplane1 SAS/SATA backplane
System Cooling (per node)
Fans2x 8cm 14 RPM middle fans
Power Supply (76mm Width)1200W Redundant Power Supplies with PMBus
Total Output Power1000W/1200W
Dimension(W x H x L)76 x 40 x 336 mm
Input100-127Vac / 15-12A / 50-60Hz 
200-240Vac / 8.5-7A / 50-60Hz 
200-240Vdc / 8.5-7A (for CCC only)
+12VMax: 83A / Min: 0A (100-127Vac) 
Max: 100A / Min: 0A (200-240Vac) 
Max: 100A / Min: 0A (200-240Vdc)
+5VsbMax: 4A / Min: 0A
Output Type19 Pairs Gold Finger Connector
CertificationTitanium Level
Operating Environment
RoHSRoHS Compliant
Environmental Spec.Operating Temperature: 10°C ~ 35°C (50°F ~ 95°F) 
Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) 
Operating Relative Humidity: 8% to 90% (non-condensing) 
Non-operating Relative Humidity: 5% to 95% (non-condensing)