Digi IX20
Compact and economical cellular routing platform with industrial feature set

- Compact and economical cellular routing platform with industrial feature set
- Redundant connectivity with dual SIMs and Digi SureLink®
- Global bands and single part number to simplify global distribution, deployment and management
- Built-in Digi TrustFence® for device security, device identity and data privacy
- Digi Remote Manager® software for easy setup, mass configuration and management
- Dual Ethernet ports and single serial (RS-232) port

SPECIFICATIONS | Digi IX20 with Digi 360* |
CELLULAR** | |
LTE-A (07) WITH DIGI CORE PLUG-IN LTE MODEM 1003-CM07-OUS** | LTE-Advanced Cat 7 (North America): B2, B4, B5, B7, B12, B13, B14 FirstNet®, B25, B26, B41, B42, B43, B48, B66, B71; 3G: B2, B5; Transfer rate (max): 300 Mbps down, 150 Mbps up; Industrial temperature |
LTE (G4) WITH DIGI CORE PLUG-IN LTE MODEM 1002-CMG4-GLB** | LTE Cat 4 (Global): B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28, B38, B39, B40, B41; 3G: B1, B2, B4, B5, B6, B8, B19; 2G: 850 / 900 / 1800 / 1900 MHz; Transfer rate (max): 150 Mbps down, 50 Mbps up; Industrial temperature |
LTE (G4-G) WITH DIGI CORE PLUG-IN LTE MODEM 1002-CMG4-GLB-G** | LTE Cat 4 (EMEA): B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28, B38, B39, B40, B41; 3G: B1, B2, B4, B5, B6, B8, B19; 2G EDGE / GPRS: 850 / 900 / 1800 / 1900 MHz; Transfer rate (max): 150 Mbps down, 50 Mbps up; Industrial temperature |
LTE (N4/P4) WITH DIGI CORE PLUG-IN LTE MODEM 1002-CMF4-OUS** | LTE Cat 4 (North America): B2, B4, B5, B12, B13, B14 FirstNet®, B66, B71; 3G: B2, B4, B5; Transfer rate (max): 150 Mbps down, 50 Mbps up; Industrial temperature |
LTE (45) WITH DIGI CORE PLUG-IN LTE MODEM 1002-CM45-OEU** | LTE Cat 4 (EMEA): B3, B7, B20, B31, B72; 450 MHz support Transfer rate (max): 150 Mbps down, 50 Mbps up; Industrial temperature |
LTE (M1) WITH DIGI CORE PLUG-IN LTE MODEM 1002-CMM1-GLB** | LTE Cat M1 / NB1 (North America): B1, B2, B3, B4, B5, B8, B12, B13, B18, B19, B20,B26, B28; 2G: 850 / 900 / 1800 / 1900 MHz Transfer rate (max): M1: 300 kbps down, 375 kbps up; NB1: 21 kbps down, 62.5 kbps up; 2G: 296 kbps down, 236 kbps up; Industrial temperature |
CONNECTORS | (2) 50 Ω SMA (center pin: female) |
SIM SLOTS | (2) Mini-SIM (2FF) |
SIM SECURITY | Secured in cellular module |
GNSS (1003-CM07 / 1002-CMG4-G) | GPS, GLONASS, BeiDou, Galileo, QZSS; Connector: 50 Ω SMA (center pin: female); Protocol NMEA 0183 V3.0; Acquisition Time Hot Start 1 s; Warm Start 29 s; Cold Start 32 s; Accuracy Horizontal: < 2 m (50%), < 5 m (90%); Altitude: < 4 m (50%), < 8 m (90%); Velocity: < 0.2 m/s |
WI-FI | |
MODULE | 1 x 1 SISO dual-band 802.11a/b/g/n/ac (2.4 GHz / 5 GHz) |
AUTHENTICATION | TACACS+, Enterprise RADIUS |
MODES | Client mode and access point mode simultaneously |
CLIENTS | Maximum 10 clients (access point mode: regardless of combination of clients and access points) |
ACCESS POINTS | Maximum 2 access points (access point mode: regardless of combination of clients and access points) |
SECURITY | WPA/WPA-2 personal, WPA/WPA-2 enterprise |
CONNECTORS | (1) 50 Ω SMA (center pin: male) |
SOFTWARE AND MANAGEMENT* | |
REMOTE MANAGEMENT | Digi Remote Manager®; SNMP v2/v3 (user installed/managed) |
LOCAL MANAGEMENT | Web UI (HTTP/HTTPS); CLI (Telnet, SSH) |
MANAGEMENT / TROUBLESHOOTING TOOLS | FTP client, SCP; protocol analyzer with PCAP for Wireshark; event logging with syslog and SMTP client; NTP/SNTP; Nagios, Intelliflow, IPerf, dynamic DNS, ping, traceroute |
MEMORY | 256 MB RAM, 256 MB flash |
ETHERNET | |
PORTS | (2) RJ-45; 10/100 Mbps (auto-sensing) |
SERIAL | |
PORTS | (1) DB9M; RS-232 DTE; signal support TXD, RXD, CTS, DTR, DCD, flow control software (XON/OFF), hardware supported (CTS/RTS) |
PHYSICAL | |
DIMENSIONS (L x W x H) | 107 mm x 162 mm x 35 mm (4.21 in x 6.38 in x 1.38 in) |
WEIGHT | 0.65 kg (1.4 lb) |
STATUS LEDs | Power, Internet, Wi-Fi, SIM 1, SIM 2, signal strength (5), LTE |
ENCLOSURE | Glass-filled polyphenylene sulphide (PPS) / IP30 |
POWER REQUIREMENTS | |
POWER INPUT | 9 - 30 VDC, reverse polarity protection, 1.0 A maximum; connector: 2-position rewireable plug with securing screws included |
POWER CONSUMPTION | 1.5 W (light traffic flow), 3.5 W (peak data transmission); 1.4 W (low power mode, idle traffic, no Ethernet WAN) |
ENVIRONMENTAL | |
OPERATING TEMPERATURE | Models with Wi-Fi: −20 °C to 70 °C (−4 °F to 158 °F) Models without Wi-Fi: −40 °C to 70 °C (−40 °F to 158 °F) |
STORAGE TEMPERATURE | −40 °C to 85 °C (−40 °F to 185 °F) |
RELATIVE HUMIDITY | 5% to 95% (non-condensing) |
ACCESSORIES | |
AVAILABLE ACCESSORIES | Accessories not included. Available accessories: industrial extended temperature or commercial power supply (required); Wi-Fi, cellular and GPS antennas, Ethernet cable, DIN rail clip kit and DIN rail mounting bracket kit (recommended / optional) |
APPROVALS** | |
CELLULAR | Visit product certifications for latest approvals and updates |
SAFETY | IEC62368-1, CB, EN62311 |
ENVIRONMENTAL | ROHS3 |
EMISSIONS / IMMUNITY | CE; RED; FCC Part 15, Subpart B; ICES-003; AU/NZS CISPR32 |
WARRANTY*** | |
PRODUCT WARRANTY | 1-year |
**Visit product certifications for latest approvals and updates. Digi CORE plug-in LTE modem is included with the corresponding IX20 model, with the ability to upgrade or replace the modem without replacing the router. Transfer rates are network operator dependent. Digi CORE 1003-CM07-OUS and 1002-CMG4-GLB-G require two cellular antennas with option for a third GNSS/GPS antenna. Digi CORE 1002-CMG4-GLB, 1002-CM45-OEU and 1002-CMF4-OUS require two cellular antennas. Digi CORE 1002-CMM1-GLB requires only one cellular antenna. Wi-Fi antenna available for Wi-Fi enabled models.
***Product warranty can be extended with Digi 360 extensions or renewals.

Digi IX20 Industrial 4G LTE Router
Versatile networking for critical applications — rugged, secure LTE router
Digi IX20 is a full-featured cellular router that can scale from basic connectivity applications to industrial-class routing and security solutions. Its flexible power and connectivity options make it a versatile choice for use in industrial infrastructure, digital signage, retail kiosks, service terminals and other critical assets with a need for secure transactions.
The high-performance architecture of the Digi IX20 router provides primary and backup WWAN connectivity over software selectable multi-carrier LTE. Digi IX20 supports software features for advanced security (stateful firewall, MAC filtering and VPN), redundancy (Digi SureLink®) and management (SNMP, event logging, analyzer trace and QOS), enabling it to be used in PCI or NERC-CIP compliant applications.
Digi IX20 can be managed with Digi Remote Manager®, a cloud-based solution that facilitates easy setup, mass configuration, maintenance and support for hundreds or even thousands of remote Digi and third-party devices. Digi Remote Manager lets you evaluate, update and configure your Digi enterprise routers and gateways — and the health of your network — at scale, after deployment.
The Digi IX20 family of routers has a single part number, which simplifies inventory control for global distribution and deployment. In addition, Digi IX20 is designed for Digi CORE® plug-in LTE modems that can be changed out or upgraded without replacing the entire router.
Resources
Leveraging Digi Solutions for Enhanced Utility Operations
Digi solutions play a pivotal role by providing utilities with advanced tools to monitor, manage, and control their infrastructure remotely.
Digi Router Product Feature Comparison Guide
Digi 4G LTE and 5G cellular solutions provide the communications backbone in three broad categories — enterprise, industrial, and transportation/mobile.
Ordering Information:
Digi IX20W — LTE Cat 4 Global; Wi-Fi
- LTE Cat 4 Global
- Wi-Fi
- (2) Ethernet
- DB-9 RS-232
Digi IX20 — LTE Cat 4 Global
- LTE Cat 4 Global
- (2) Ethernet
- DB-9 RS-232