N-R718N17
LoRaWAN 1-Phase Current Meter with 1 x 75A Clamp-On CT
- ER14505 battery (3.6V/section) in parallel power supply
- Protection level: host body IP53, sensor IP30
- The base is attached with a magnet that can be attached to a ferromagnetic material object
- Adopt clamp-on current transformer, it can be easily connected with the device to be monitored
- LoRaWANTM Class A compatible
- Frequency Hopping Spread Spectrum (FHSS)
- Improved power management for longer battery life
Product Specification
| Input Power | 2 x 3.6V ER14505 AA Size lithium batteries (3.6V2400mah/section） |
| Standby Current | 25uA |
| Receiving Current (max) | 11mA @3.3V |
| Transmitting Current (max) | 127mA/3.3V |
| Battery Measurement Accuracy Accuracy | ±0.1V |
| Current Resolution | 1mA |
| Current Measurement Range | 100mA to 75A (varies according to the configuration of the current transformer) |
| Frequency: | |
| Frequency Range | 863MHz-928MHz 470MHz-510MHz |
| TX Power | US915 20dbm； AS923 16dbm； AU915 20dbm； CN470 19.15dbm； EU868 16dbm； KR920 14dbm； IN865 20dbm； |
| Receiving Sensitivity | -136dBm（LoRa，Spreading Factor=12，Bit Rate=293bps )； -121dBm (FSK,Frequency deviation=5kHz, Bit Rate=1.2kbps) |
| Antenna Type | Built-in antenna |
| Communication Distance | Up to 10 km (visible linear obstacle-free transmission distance , actual transmission distance depends on the environment ) |
| Data Transfer Rate | LoRa: 0.3kbps～50kbps FSK: 1.2kbps～300kbps |
| Modulation | LoRa/FSK (Note: You can choose one of them) |
| Supportable LoRaWAN Band | EU863-870,US902-928,AU915-928,KR920-923,AS923-1,AS923-2,AS923-3,IN865-867,CN470-510 (Note: The frequency band is optional and needs to be configured before shipment) |
| Physical: | |
| Main Body Dimension | Host body: L: 112 mm *W: 88.19 mm *H: 32 mm Sensor: H:37.5 *L:39 *W:14 |
| Host body Weight | About 141 g |
| Sensor Weight | About 49.6g |
| Sensor External Wiring Length | About 900mm |
| Environment Temperature Range | -20℃ ~ 55℃ |
| Storage Temperature Range | -40℃～85℃ |
| Environment Humidity Range | < 90%RH (No condensation) |
| Mounting | Screw / Magnet |
LoRaWAN single-phase current detector is used to detect single-phase electrical input current. The device is compatible with the LoRaWAN protocol, and integrates a chip module that conforms to the LoRaWAN wireless protocol to display the collected data in the gateway.