Digi XBee RR

Easy-to-add connectivity in a compact, low-power, footprint

Anewtech Systems XBee RF-Module Digi XBee Zigbee  Digi International Digi-XBee-RR
  • SIZE AND FLEXIBILITY
    • At 13 mm x 19 mm, the new Digi XBee RR micro form factor allows for more compact and portable applications
    • Digi XBee® RR is one module for all protocols including: Zigbee, 802.15.4,DigiMesh® and BLE (slave only), all configurable via Digi XCTU®
  • SECURITY AND MANAGEMENT
    • Intrinsic IoT security with Digi TrustFence®, a layered approach securing the edge device, through the gateway, into and out of the IoT
    • Connect Digi XBee RR with the Digi IX15 IoT gateway and router to configure, monitor and control your network with Digi Remote Manager®
Datasheet
Product Specification
ModelDigi XBee RRDigi XBee RR PRO
PERFORMANCE
TRANSCEIVER CHIPSETSilicon Labs EFR32MG SoC
DATA RATERF 250 Kbps, serial up to 1 Mbps
INDOOR/URBAN RANGE*Up to 60 m (200 ft)Up to 90 m (300 ft)
OUTDOOR/RF LINE-OF-SIGHT RANGE*Up to 1200 m (4000 ft)Up to 3200 m (2 miles)
TRANSMIT POWER6.3 mW (+8 dBm); channel 26 max power: +3 dBm79 mW (+19 dBm); channel 26 max power: +3 dBm
RECEIVER SENSITIVITY (1% PER)-103 dBm normal mode
BLUETOOTH® PERFORMANCE
TRANSCEIVER CHIPSETSilicon Labs EFR32MG SoC
BLE VERSIONSupports Bluetooth Low Energy (BLE) 4.2 (slave only) and capable of interoperating with BLE 5.0 devices that support 1M PHY. Hardware is software upgradable to 5.0, but not yet enabled except payload extensions (future release).
MAXIMUM DATA RATE1 Mbps
INDOOR/URBAN RANGE*Up to 15 m (49 ft)
OUTDOOR/RF LINE-OF-SIGHT RANGE*Up to 300 m (984 ft)
TRANSMIT POWER+8 dBm
RECEIVER SENSITIVITY (1% PER)-95 dBm normal mode
FEATURES
SERIAL DATA INTERFACEUART, SPI, I2C
CONFIGURATION METHODAPI or AT commands, local or over-the-air (OTA)
FREQUENCY BANDISM 2.4 GHz
FORM FACTORMicro, through-hole, surface mount
INTERFERENCE IMMUNITYDSSS (Direct Sequence Spread Spectrum)
ADC INPUTS(4) 10-bit ADC inputs
DIGITAL I/O13
ANTENNA OPTIONSThrough-hole: PCB antenna, U.FL connector, RPSMA connector
SMT: RF pad, PCB antenna, U.FL connector
Micro: U.FL antenna, RF pad, chip antenna
OPERATING TEMPERATURE-40º C to 85º C (-40º F to 185º F)
DIMENSIONS (L X W X H)Through-hole: 2.438 x 2.761 cm (0.960 x 1.087 in)
SMT: 2.199 x 3.4 x 0.305 cm (0.866 x 1.33 x 0.120 in)
Micro: 13 x 19 x 2 mm (0.533 x 0.76 x 0.087 in)
MEMORY1 MB / 96 kB RAM
NETWORKING AND SECURITY
PROTOCOLZigbee 3.0
ENCRYPTION128/256-bit AES
RELIABLE PACKET DELIVERYRetries/acknowledgements
IDSPAN ID and addresses, cluster IDs and endpoints (optional)
CHANNELS16 channels
POWER REQUIREMENTS
SUPPLY VOLTAGE1.71 to 3.8 V
TRANSMIT CURRENT32 mA at 3.3 V, +8 dBm193 mA at 3.3 V, +19 dBm
RECEIVE CURRENT14 mA
SLEEP CURRENT8 µA at 25º C (77º F)
REGULATORY APPROVALS
FCC, IC (NORTH AMERICA)YesYes
ETSI (EUROPE)NoNo
Anewtech-Systems-XBee-RF-Module-Digi-XBee-RR-Digi-International

Digi XBee RR wireless modules accelerate time-to-market for designers, OEMs and solution providers by quickly enabling wireless connectivity and easy-to-add functionality. 

Building on industry-leading technology, pre-certified Digi XBee RR wireless modules offer the flexibility to switch between multiple frequencies and wireless protocols as needed. Digi XBee RR offers a fully interoperable ecosystem covering all vertical markets including building automation, smart energy, digital health, intelligent lighting, and others.

 From edge computing to future migration, Digi XBee RR wireless modules offer size, weight, power and performance advantages ideal for scalable device connectivity, security and flexibility. 

Digi Remote Manager® offers a central, cloud-based platform for configuring, monitoring and controlling your entire Digi XBee RR wireless network, via a gateway, as shown in the application example. Built-in Digi TrustFence security, identity and data privacy features use more than 175 controls to protect against new and evolving cyber threats.