Digi XBee SX RF Modems

1-Watt industrial-grade 900 MHz RF modem with best-in-class range and power consumption

Anewtech-Systems-XBee-RF-Module-XBee-Gateway-Digi-XBee-SX-RF-Modems-Digi-International
  • Adjustable output power up to 1-Watt achieves up to 65 mile range with high gain antenna
  • Interfaces options include RS-232, RS-485, USB, Analog I/O and Digital I/O
  • DigiMesh networking topology for redundancy and reliability
  • 256-bit AES encryption for secure data communications
  • Rugged metal enclosure and -40º C to +85º C operating temperature for industrial applications
  • Fully certified for use in free, unlicensed 900 MHz band
Product Specification
ItemDigi XBee SX RF Modems
PERFORMANCE
INDOOR/URBAN RANGEUp to 18 km (11 mi)* at low data rate
OUTDOOR/RF LINE-OF-SIGHT RANGEUp to 105 km (65 mi)** at low data rate
TRANSMIT POWERUp to 30 dBm software selectable
RF DATA RATE (SOFTWARE SELECTABLE)Low data rate: 10 kbps; Middle data rate: 110 kbps; High data rate: 250 kbps
RECEIVER SENSITIVITYLow data rate: -113 dBm; Middle data rate: -106 dBm; High data rate: -103 dBm
RECEIVER IF SELECTIVITYLow data rate: 40 dB @ 250 kHz; 50 db @ 500 kHz
Middle data rate: 30 dB @ 250 kHz; 40 db @ 500 kHz
High data rate: 30 dB @ 500 kHz; 45 db @ 1000 kHz
RECEIVER RF SELECTIVITYBelow 900 MHz and above 930 MHz: >50 dB
NETWORK AND SECURITY
FREQUENCY RANGEISM 902 MHz to 928 MHz
SPREAD SPECTRUMFrequency hopping
SUPPORTED NETWORK TOPOLOGIESMesh, Point-to-point, Point-to-multipoint, Peer-to-peer
MODULATIONGaussian Frequency Shift Keying (GFSK)
ENCRYPTIONOptional 254-bit Advanced Encryption Standard (AES) cipher block chaining (CBC) Encryption
ANTENNA
CONNECTORRPSMA
ANTENNA IMPEDANCE50 Ω unbalanced
INPUT LEVEL AT ANTENNA PORTMaximum 6 dBm
POWER REQUIREMENTS
SUPPLY VOLTAGE RANGE7-30 VDC
TYPICAL SUPPLY VOLTAGE12 V
RECEIVE CURRENT20 mA (@12V)
TRANSMIT CURRENT300 mA (@12V)
SLEEP CURRENT5 mA (@12V)
PHYSICAL PROPERTIES
SIZE4.5 in x 2.75 in x 1.125 in (11.4 cm x 7 cm x 2.9 cm)
WEIGHT5 oz (142 g)
DATA CONNECTIONFemale RJ-45 (RS232/485), 10-pin screw terminal (4 digital, 4 analog, GND, 12 VDC output), USB mini-B (configuration port)
OPERATING TEMPERATURE-40° C to +85° C (Industrial)
ANALOG INPUTS
ABSOLUTE VOLTAGE RATINGMaximum: 11 V; Minimum: -.05 V (each pin)
OPERATING INPUT RANGESingle-ended voltage mode: 0 - 10 VDC
Current loop mode: 4 - 20 mA
Differential voltage mode: ± 4 VCD
IMPUT IMDEDANCESingle-ended voltage mode: 13300 Ω
Current loop mode: 120 Ω
Differential voltage mode: ~1 MΩ
RESOLUTION10 bits
ACCURACY.5% at 25º C
DIGITAL INPUTS
INPUT TYPENon-inverting Schmitt trigger gate
POSITIVE-GOING SWITCHING THRESHOLD2.5 V
NEGATIVE-GOING SWITCHING THRESHOLD1 V
ABSOLUTE VOLTAGE RATINGMaximum: 31 V; Minimum: -.05 V (each pin)
IMPUT IMDEDANCE~1 MΩ
DIGITAL OUTPUTS
OUTPUT TYPEOpen collector sinking driver
MAXIMUM SINK CURRENT200 mA
MAXIMUM SUPPLY VOLTAGE31 V (for external pull-up resistor)
RESISTOR PULL-UPS10 kΩ pulled up to 3.3 VDC

Digi XBee SX 1-Watt 900 MHz RF modems provide a combination reliability and redundancy for integrators building low-power, mission-critical wireless systems. With interface options including RS232/485 or Digital/ Analog I/O, these modems utilize the DigiMesh® wireless networking protocol, with redundant mesh network operation and support for low-power sleeping nodes.

Customers that don’t require mesh network architecture can configure the modem to operate in simple point to multipoint mode. With ideal RF line-of-sight range estimated up to 65 miles and strong interference blocking, these modems are ideal for applications requiring a reliable, redundant wireless cable replacement over longer ranges.

The Digi XBee SX modems can be configured easily via the USB port, using Digi’s free XCTU software. They are precertified for use in multiple countries and provide secure, reliable delivery of critical data between devices with 256-bit AES encryption.