XBee-PRO 900HP RF Modems
900 MHz stand-alone RF modems provide outstanding range in a reliable wireless solution
- Industrial design with -40° C to 85° C operating temperature
- Superior outdoor LOS range of up to 28 Miles with high-gain antenna
- Over-the-air firmware updates via other XBee-PRO 900HP modems/modules or Digi Remote Manager
- Software-selectable channel mask for interference immunity
- RF Data throughput up to 200 Kbps
| Item | XBee-PRO® 900HP RF Modems |
| Performance | |
| Indoor/Urban Range | Performance Indoor/Urban Range 10 Kbps: up to 2000 ft (610 m); 200 Kbps: up to 1000 ft (305 m) |
| Outdoor/RF Line-of-Sight Range | 10 Kbps: up to 9 miles (15.5 km); 200 Kbps: up to 4 miles (6.5 km); w/2.1 dbi dipole antenna |
| Transmit Power Output | Up to 24 dBm (250 mW) software selectable |
| Throughput Data Rate | 10 Kbps: up to 8.8 Kbps; 200 Kbps: up to 105.5 Kbps; (When configured as point-to-multipoint) |
| RF Data Rate | 10 Kbps or 200 Kbps |
| Interface Data Rate | 125-65,0000 bps (Software selectable, includes non-standard baud rates) |
| Receiver Sensitivity | 10 Kbps: -110 dBm; 200 Kbps: -101 dBm |
| Network and Security | |
| Frequency | 902-928 MHz (located in the 900 MHz ISM Band) |
| Spread Spectrum | Frequency hopping |
| Supported Network Topologies | Mesh, Point-to-point, Point-to-multipoint, Peer-to-peer |
| Channel Capacity | 8 hop sequences share 25 channels, 64 channels available (there are 64 channels available, of which the user can select 25 that are hopped through in 8 different patterns. |
| Antenna | |
| Connector | RPSMA (Reverse polarity SMA) |
| Power Requirements | |
| Power Supply | 7-30 VDC |
| Receive Current | 60 mA(@9V) |
| Transmit Current | 140 mA(@9V) |
| Physical Properties | |
| Size | 4.5 in x 2.75 in x 1.125 in (11.4 cm x 7 cm x 2.9 cm) |
| Weight | 5.25 oz (150 g) |
| Data Connection | RS-232 female DB-9, RS-485/422 screw terminal, USB Type B, Config USB mini-B, 10/100 Ethernet |
| Operating Temperature | -40° C to 85° C (Industrial) |
XBee-PRO 900HP RF modems can be configured in minutes to provide reliable serial cable replacement between many different types of electronic devices. These modems utilize the XBee-PRO 900HP 900 MHz RF Module in an enclosure with interface options that include RS-232, RS-485, USB and Ethernet with transmission ranges of up to 28 miles.
XBee-PRO 900HP RF modems allow the user to easily make their existing wired systems wireless simply by connecting to this product. They take advantage of the DigiMesh ® networking protocol, featuring dense network operation using mesh technology.
XBee-PRO 900HP RF modems can wirelessly connect a variety of devices across many applications including remote monitoring, building automation/ security, industrial automation/SCADA, fleet management/asset tracking and sensor data capture in embedded systems.