AD-WISE-2410X
Explosion Proof LoRaWAN Smart Vibration Sensor
- LoRaWAN wireless connectivity
- Built-in 3-axis accelerometer and temperature sensor
- On-board computing. Directly sends VRMS, ARMS, Peak, Displacement, Kurtosis, Crest factor, Skewness and Standard Deviation values to applications
- Support battery power and remote configuration settings, no wiring installation needed
- Easy settings with user friendly interfaces on WISE Studio utility
- ISO 10816-1 compliant
- Support wide temperature 0 ~ 70 °C
- IP65 enclosure design
- IECEx Zone 2, Zone 21, ATEX2 compliant
WISE-2410X, a vibration and temperature integrated sensor with ATEX2 and IECEx certification for installing in hazardous and explosive environments, provides accurate operation status by cross-comparison of RMS speeds and eigenvalues against ISO 10816-1 standards and vibration characteristic values.
Smart Vibration Sensor
Battery-Powered
Utilizing LPWAN technology means that the WISE-2410 series can be powered by 3.6-V AA lithium battery.
Easy Operation with WISE Studio
With WISE Studio, you can set up operation parameters for frequency, report intervals, and alarms and more.
3-axis Vibration Inspection
WISE-2410 series uses 3-axis composite measurements to detect vibration and transfers those characteristic values
Explosion Proof
WISE-2410X is CID2, ATEX and IECEx (Zone 2 and Zone 21) certified for installation in hazardous and explosive environments.
WISE-2410 & WISE-2410X
LoRaWAN Smart Vibration Sensor
The WISE-2410 series is a LoRaWAN wireless condition monitoring sensor featuring an ARM Cortex-M4 processor, LoRa transceiver, 3-axis accelerometer, and temperature sensor. The WISE-2410X offers the same features with added explosion-proof capabilities.
- LoRa LPWAN with 5-km line-of-sight communication
- Superior penetration, low interference
- Easy to organize LoRa network data access
WISE-2460
Smart Vibration Sensors
WISE-2460 is a robust RS-485 smart vibration sensor integrated with an ARM Cortex-M7 processor, 10KHz@1- axis high detection range accelerometer and temperature sensor. This powerful computing device balances the bandwidth between edge devices and the application service on the user side.
- RS-485 serial communication through Modbus/RTU protocols
- 10KHz@1-axis frequency detection range
- Support max 10 customize detection ranges between 5 ~ 10,000Hz
Case Study: Explosion Proof LoRaWAN Smart Vibration Sensor in Oil Refinery
Requirement
Due to the refinery’s large premises and the long list of equipment requiring monitoring, it would be too costly to physically wire sensor nodes to local gateways. The many metal surfaces throughout the entire site would also make it difficult to install cabling. Furthermore, all devices had to be rated for use in outdoor and hazardous environments in order to meet safety requirements. Therefore, an explosion-proof wireless vibration sensor integrated with LoRaWAN private networking solution and data management service was required in order to overcome the growing management and operational challenges of manual inspections and reduce maintenance costs.
Features
- WISE-2410X sensor with IP65 rating and ATEX2/IECEx certification for hazardous environments.
- Monitors vibration and temperature in rotating equipment, compliant with ISO 10816 and ISO 20816 standards.
- Long-range, bidirectional LoRaWAN communication (up to 15 km) for fewer field devices.
Benefits
- Boosts productivity and reduces labor needs in oil refining.
- Enables remote monitoring and frequent data recording of equipment.
- Centralized, accessible management from any location