O-RGPS-R9244GP+
Industrial Layer-3 28-port managed Gigabit PoE Ethernet switch. 24x10/100/1000 Base-T(X) P.S.E. and 4x1G/10G Base-X, SFP+
- Supports Layer 3 routing, RIP and static routing function
- Support O-Ring (recovery time < 30ms over 250 units of connection) and MSTP(RSTP/STP compatible) for Ethernet Redundancy
- O-Chain allow multiple redundant network rings
- *note Support standard IEC 62439-2 MRP (Media Redundancy Protocol) function
- 24 port P.S.E. fully compliant with IEEE802.3at standard, provide up to 30 Watts per port
- Support PoE scheduled configuration and PoE auto-ping check function
- Support hardware IEEE 1588v2 clock synchronization
- Support IPV6 new internet protocol version
- Support Modbus TCP protocol
Datasheet
Product Specification
| Model | RGPS-R9244GP+-P | RGPS-R9244GP+-LP |
| Physical Ports | ||
| 10/100/1000Base-T(X) with P.S.E. Ports in RJ45 Auto MDI/MDIX | 24 | |
| 1G/10GBase-X with SFP+ port | 4 | |
| Technology | ||
| Ethernet Standards | IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX and 100Base-FX IEEE 802.3ab for 1000Base-T IEEE 802.z for 1000Base-X IEEE 802.3ae for 10Gigabit Ethernet IEEE 802.3x for Flow control IEEE 802.3ad for LACP (Link Aggregation Control Protocol ) IEEE 802.1p for COS (Class of Service) IEEE 802.1Q for VLAN Tagging IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol) IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol) IEEE 802.1x for Authentication IEEE 802.1AB for LLDP (Link Layer Discovery Protocol) IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.) | |
| MAC Table | 32k | |
| Packet Buffer | 32Mbits | |
| Flash Memory | 128Mbits | |
| DRAM Size | 1Gbits | |
| Jumbo frame | Up to 10K Bytes | |
| Priority Queues | 8 | |
| Processing | Store-and-Forward | |
| Switch Properties | Switching latency: 7 us Switching bandwidth: 128Gbps Max. Number of Available VLANs: 4095 VLAN ID Range : VID 1 to 4094 IGMP multicast groups: 128 for each VLAN Port rate limiting: User Define | |
| Security Features | Device Binding security feature Enable/disable ports, MAC based port security Port based network access control (802.1x) MAC-based authentication (802.1x) VLAN (802.1Q ) to segregate and secure network traffic SNMPv3 encrypted authentication and access security Https / SSH enhance network security Web and CLI authentication and authorization IP source guard | |
| Software Features | IEEE 802.1D Bridge, auto MAC address learning/aging and MAC address (static) Multiple Registration Protocol (MRP) MSTP (RSTP/STP compatible) Redundant Ring (O-Ring) with recovery time less than 30ms TOS/Diffserv supported Quality of Service (802.1p) for real-time traffic VLAN (802.1Q) with VLAN tagging IGMP v2/v3 Snooping Application-based QoS management DOS/DDOS auto prevention Port configuration, status, statistics, monitoring, security DHCP Server/Client/ Relay Modbus TCP SNTP server SMTP Client | |
| Network Redundancy | O-Ring O-Chain *note MRP Fast Recovery MSTP (RSTP/STP compatible) | |
| RS-232 Serial Console Port | RS-232 in DB-9 connector with console cable. 115200bps, 8, N, 1 | |
| LED Indicators | ||
| Power Indicator (PWR) | Green: Power indicator | |
| Ring Master Indicator (R.M.) | Green: Indicates that the system is operating in O-Ring Master mode | |
| O-Ring Indicator (Ring) | Green: Indicates that the system operating in O-Ring mode Green Blinking: Indicates that the Ring is broken. | |
| Fault Indicator (Fault) | Amber: Indicate unexpected event occurred | |
| 10/100/1000Base-T(X) RJ45 Port Indicator | Dual color LED for Link/Act/Speed indicator ~ Green (1G Link/Act) / Amber (10/100M Link/Act) | |
| 1G/10GBase-X SFP+ Port Indicator | Green for port Link/Act. | |
| PoE Indicator | Green : PoE enabled LED x 24 | |
| Fault contact | ||
| Relay | None | None |
| Power | ||
| Power Input | 100~240VAC with AC socket | 100~240VAC with AC socket |
| Power supply | 1000 Watts | 390 Watts |
| Power consumption (Typ.) | 75 Watts (PoE output not included) | 49 Watts |
| Max PoE output | 720 Watts (-20℃~50℃) 320 Watts (50℃~60℃) | 300Watts (-20℃~50℃) 240Watts (50℃~60℃) |
| Overload Current Protection | Present | |
| Reverse Polarity Protection | Not Present | |
| Physical Characteristics | ||
| Enclosure | 19 inches rack mountable | |
| Dimensions (W x D x H) | 431 (W) x 342 (D) x 44 (H)mm (16.97 x 13.46 x 1.73 inch) | |
| Weight (g) | 6,720g | 5,580g |
| Environmental | ||
| Storage Temperature | -40 to 85°C (-40 to 185°F) | |
| Operating Temperature | -20 to 60oC (-4 to 140oF) | |
| Operating Humidity | 5% to 95% Non-condensing | |
| Regulatory Approvals | ||
| EMC | CE EMC (EN 55024, EN 55032), FCC Part 15 B | |
| EMI | EN 55032, CISPR32, EN 61000-3-2, EN 61000-3-3, FCC Part 15 B class A | |
| EMS | EN 55024 (IEC/EN 61000-4-2 (ESD), IEC/EN 61000-4-3 (RS),IEC/EN 61000-4-4 (EFT), IEC/EN 61000-4-5 (Surge), IEC/EN 61000-4-6 (CS), IEC/EN 61000-4-8(PFMF), IEC/EN 61000-4-11 (DIP)) | |
| Shock | IEC60068-2-27 | |
| Free Fall | IEC60068-2-31 | |
| Vibration | IEC60068-2-6 | |
| Safety | EN 60950-1 | |
| MTBF | 249,143 hrs | 214,432hrs |
O-RGPS-R9244GP+-P is Layer-3 Gigabit managed redundant ring PoE Ethernet switch with 24x10/100/1000Base-T(X) IEEE802.3at P.S.E. ports and 4x1G/10GBase-X SFP+ ports. The switch support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. O-RGPS-R9244GP+-P also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each O-RGPS-R9244GP+-P switch has 24x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection.