AS-1114S-WN10RT
1U AMD Server. 10 Hot-swap U.2 NVMe4/NVMe3/SATA3
- Single AMD EPYC™ 7003/7002 Series Processor (The latest AMD EPYC™ 7003 Series Processor with AMD 3D V-Cache™ Technology requires BIOS version 2.3 or newer)
- 16 DIMMs; up to 4TB 3DS ECC DDR4-3200MHz RDIMM/LRDIMM
- 2 PCI-E 4.0 x16 (FHHL) slots, 1 PCI-E 4.0* x16 (LP) slot
- Integrated IPMI 2.0 + KVM with dedicated LAN
- Software Out of Band License key (SFT-OOB-LIC) included for OOB BIOS management
- 10 Hot-swap U.2 NVMe drive support, Optional 10 SATA3 drive support via additional cables
- 2x 10GBase-T LAN ports via Broadcom BCM57416 Controller
- 1 VGA, 7 USB 3.0 (4 rear, 2 front, 1 Type A)
- 2 SuperDOM (Disk on Module) ports
- 750W Redundant Power Supplies Platinum Level High-efficiency (Full redundancy based on configuration and application load)
Product Specification
| AS -1114S-WN10RT | A+ Server 1114S-WN10RT |
| Motherboard | Super H12SSW-NTR |
| Processor/Cache | |
| CPU | Single AMD EPYC™ 7003/7002 Series Processor (The latest AMD EPYC™ 7003 Series Processor with AMD 3D V-Cache™ Technology requires BIOS version 2.3 or newer) Socket SP3 Support CPU TDP up to 280W |
| Cores | Up to 64 Cores |
| System Memory | |
| Memory Capacity | 16 DIMM slots Up to 4TB 3DS ECC DDR4-3200MHz RDIMM/LRDIMM |
| Memory Type | DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs |
| On-Board Devices | |
| Chipset | System on Chip |
| SATA | SATA3 (6Gbps) |
| Network Controllers | Dual 10GBase-T LAN with via Broadcom BCM57416 |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
| Video | ASPEED AST2500 BMC |
| Input / Output | |
| SATA | 2 SATA3 (6 Gbps) ports |
| LAN | 2 RJ45 10GBase-T ports 1 RJ45 Dedicated IPMI LAN port |
| USB | 7 USB 3.0 ports (4 rear, 2 front, 1 Type A) |
| Video | 1 VGA port |
| DOM | 2 Super DOM (Disk on Module) ports |
| System BIOS | |
| BIOS Type | AMI 32Mb SPI Flash ROM |
| Management | |
| Software | Super Doctor 5, Watch Dog, NMI, SUM , IPMI 2.0 , KVM with dedicated LAN |
| Power Configurations | ACPI / APM Power Management |
| PC Health Monitoring | |
| CPU | Monitors for CPU Cores, Chipset Voltages, Memory. 4+1 Phase-switching voltage regulator |
| FAN | Fans with tachometer monitoring Status monitor for speed control Pulse Width Modulated (PWM) fan connectors |
| Temperature | Monitoring for CPU and chassis environment Thermal Control for fan connectors |
| Chassis | |
| Form Factor | 1U Rackmount |
| Model | CSE-116TS-R706WBP5-N10 |
| Dimensions and Weight | |
| Width | 17.2" (437mm) |
| Height | 1.7" (43mm) |
| Depth | 23.5" (597mm) |
| Weight | Net Weight: 25 lbs (11.34 kg) Gross Weight: 39 lbs (17.69 kg) |
| Available Colors | Black |
| Front Panel | |
| Buttons | Power On/Off button UID button |
| LEDs | Power status LED HDD activity LED Network activity LEDs Universal Information (UID) LED |
| Expansion Slots | |
| PCI-Express | 2 PCI-E 4.0 x16 (FHHL) slots 1 PCI-E 4.0* x16 (LP) slot 2 PCI-E / SATA 3.0 x2 NVMe M.2 slots * Limited Support: On some PCI-E 4.0 devices, it will only run at PCI-E 3.0 speed. |
| Drive Bays | |
| Hot-swap | 10 Hot-swap U.2 NVMe drive support Optional 10 SATA3 drive support via additional SATA cables |
| Backplane | Supports 10 NVMe or 10 SATA3 |
| System Cooling | |
| Fans | 6 heavy duty fans with Optimal Fan Speed Control |
| AC/DC240V Input Redundant Power Supply | 700W/750W Redundant Power Supplies with PMBus |
| Total Output Power | 700W: 100 - 140Vac 750W: 200 - 240Vac 750W: 200 - 240Vdc (for CCC only) |
| Dimension (W x H x L) | 54.5 x 40.25 x 320 mm |
| Input | 100 - 140Vac / 8 - 6A / 50-60Hz 200 - 240Vac / 4.5 - 3.8A / 50-60Hz 200 - 240Vdc / 4.5 - 3.8A (CCC Only) |
| +12V | Max: 58A / Min: 0.5A (100 - 140Vac) Max: 62A / Min: 0.5A (200 - 240Vac) Max: 62A / Min: 0.5A (200 - 240Vdc) (CB/CCC Only) |
| +5V sb | Max: 3A / Min: 0A |
| Output Type | Gold Finger Connector Mating with Molex 45984-4343 |
| Certification | Platinum Certified |
| Operating Environment | |
| RoHS | RoHS Compliant |
| Environmental Spec. | Operating Temperature: 10°C ~ 35°C Non-operating Temperature: -40°C to 60°C Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) |
WIO Servers Industry’s Widest Variety of I/O Optimized Servers
Supermicro® A+ WIO systems offer a wide range of I/O options to deliver truly optimized systems for specific requirements. Users can optimize the storage and networking alternatives to accelerate performance, increase efficiency and find the perfect fit for their applications.
In addition to enabling customizable configurations and optimization for multiple application requirements, A+ WIO servers also provide attractive cost advantages and investment protection.
COST AND ENERGY EFFICIENCY FOR DATA CENTER ENVIRONMENTS
- Cost saving single-socket I/O configurability with up to 64 cores, 8 or 16 DIMMs
- Up to 10x (1U) U.2 NVMe and dual onboard 10G
- Redundant high-efficiency 750W Platinum Level or 1200W Titanium power supplies
AS-1014S-WTRT1U Single-Processor Server
8 DIMMs
4x 3.5" SATA drives,
2x M.2, optional 4x U.2 NVMe
2x NVIDIA T4 GPUs
AS-1114S-WTRT 1U Single-Processor Server
8 DIMMs
10x 2.5" SATA, 2x M.2,
optional 2x U.2 NVMe drives
2 NVIDIA T4 GPUs
AS-1114S-WN10RT1U Single-Processor Server
16 DIMMs
10x 2.5" U.2 NVMe drives